Adventure Motorcycle Magazine Subscribe Now

Page 5 of 5 FirstFirst ... 345
Results 41 to 48 of 48
  1. #41 New Handlebar Switches and Hand Guards 
    Senior C-Moto Guru Steve_Halt's Avatar
    Join Date
    Apr 2012
    Location
    China, Jiangsu, Nanjing
    Posts
    607
    I have installed new handlebar switches (the installation was pretty straightforward) and found out that the old left one had a broken high beam flash button, and the old right one had a broken tip that was supposed to fix the handlebar switch in place on the handlebar.
    I was quite surprised to find out that that tip was plastic rather than metal.

    I also installed cheap plastic taobao hand guards on the scooter. Now it's much more comfortable to ride in the rain and in cold weather.
    All good things happen after 3,000 rpm.
    Reply With Quote  
     

  2. #42 Re: New Handlebar Switches and Hand Guards 
    Senior C-Moto Guru Steve_Halt's Avatar
    Join Date
    Apr 2012
    Location
    China, Jiangsu, Nanjing
    Posts
    607
    Just got back from a week-long trip. It's a pleasant surprise that the scooter battery took a week of no riding just fine, and the scoot started as usual. The only annoyance was the fact that the whole dashboard (except for idiot lights) went dead all of a sudden without any obvious reason. A day later though the dashboard magically came to life all by itself.
    All good things happen after 3,000 rpm.
    Reply With Quote  
     

  3. #43 Winter Riding 
    Senior C-Moto Guru Steve_Halt's Avatar
    Join Date
    Apr 2012
    Location
    China, Jiangsu, Nanjing
    Posts
    607
    It has finally gotten real cold in Nanjing, and once again I'm impressed with the scoot's fairing. Still, I'm getting me one of those aprons you see locals riding in, since I believe it will enhance my winter riding hundredfold.

    Update: I got my apron from Taobao, and indeed it made winter riding much more comfortable! Wonder why I didn't think of doing it last winter!
    Last edited by Steve_Halt; 01-06-2017 at 05:20 AM. Reason: Update
    All good things happen after 3,000 rpm.
    Reply With Quote  
     

  4. #44 Jetmax Tranny 
    Senior C-Moto Guru Steve_Halt's Avatar
    Join Date
    Apr 2012
    Location
    China, Jiangsu, Nanjing
    Posts
    607
    Hello my non-existent readers!

    I wonder if anyone has ever thought of / tried replacing original Jetmax's clutch, variator pulley and torque driver with Japanese scooter parts (Yamaha / Honda / Suzuki / Kawasaki)? If yes, and if it worked well, I'd be super happy if you could give some suggestions here.

    I plan to look into upgrading my transmission this summer - might as well look into Japanese mods.
    All good things happen after 3,000 rpm.
    Reply With Quote  
     

  5. #45 Topbox Mount Broke 
    Senior C-Moto Guru Steve_Halt's Avatar
    Join Date
    Apr 2012
    Location
    China, Jiangsu, Nanjing
    Posts
    607
    IMG_3328.jpg

    IMG_3329.JPG

    IMG_3330.JPG

    No curb-jumping; never loaded more than a rain racket and a few bungee cords in my top box. It just happened.
    The thing that frustrates me most (besides having to wait for the part for over a week since nobody stocks spares for Jetmax any longer) is the fact that it is all not real metal.
    It may be painted like metal and feel like steel on the outside, yet inside it's some bread-like porous rice crap.
    What a pity Chunfeng, what a pity.
    All good things happen after 3,000 rpm.
    Reply With Quote  
     

  6. #46  
    motor maniac ShuBen's Avatar
    Join Date
    Jul 2010
    Location
    Beijing
    Posts
    554
    Its aluminum cast. Its caused most probably by vibrations.
    If overloaded it has no elastic range and crack from one moment to next.
    That's the typical compromise between weight and durability

    Sent from my GN8003 using Tapatalk
    Shineray X2, R1200GS LC , HD Lowrider sidecar
    Reply With Quote  
     

  7. #47 Re: Steve's CFMoto 250T-6a Jetmax 
    Senior C-Moto Guru Steve_Halt's Avatar
    Join Date
    Apr 2012
    Location
    China, Jiangsu, Nanjing
    Posts
    607
    Quote Originally Posted by ShuBen View Post
    Its aluminum cast. Its caused most probably by vibrations.
    If overloaded it has no elastic range and crack from one moment to next.
    That's the typical compromise between weight and durability

    Sent from my GN8003 using Tapatalk
    Right. Well, anyways, I've already ordered a new handle. Will replace the broken one in a week or so. Nothing critical :)
    All good things happen after 3,000 rpm.
    Reply With Quote  
     

  8. #48 Re: Steve's CFMoto 250T-6a Jetmax 
    Senior C-Moto Guru Steve_Halt's Avatar
    Join Date
    Apr 2012
    Location
    China, Jiangsu, Nanjing
    Posts
    607
    Got a new handle from taobao and finally fund time to install it. As good as new :)
    All good things happen after 3,000 rpm.
    Reply With Quote  
     

Page 5 of 5 FirstFirst ... 345

Similar Threads

  1. 2010 CFMoto Jetmax 250 Scooter
    By bikerdoc in forum Scooter
    Replies: 183
    Last Post: 05-29-2016, 04:49 AM
  2. Steve's CFMoto 650 NK(春风 650 NK)
    By Steve_Halt in forum Street
    Replies: 431
    Last Post: 03-19-2016, 06:45 AM
  3. CFMoto Jetmax in Minneapolis, Minnesota
    By vintner in forum Welcome to MCM!
    Replies: 20
    Last Post: 08-24-2012, 10:24 PM
  4. Spark plug heat range for CFMoto 250T-F?
    By joema in forum Maintenance
    Replies: 1
    Last Post: 11-23-2011, 03:13 AM
  5. CFMoto Jetmax 250cc
    By bikerdoc in forum Scooter
    Replies: 11
    Last Post: 07-26-2011, 04:00 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •