Adventure Motorcycle Magazine Subscribe Now

Results 1 to 5 of 5
  1. #1 Help! SO Many Wires! Pulse Adrenaline Loom. 
    C-Moto Noob
    Join Date
    Mar 2016
    Location
    UK
    Posts
    3
    Hello,

    I have a Pulse adrenaline engine I bought from somebody breaking a bike. I also have the wiring loom. I am going to install it into an off road buggy. I have worked out where most of the connections go between the CDI and the engine, coil etc, but there's a few things I can't work out. There are 2 connectors that have about 9 pins each in them what are they for on the bike? There is also something that's a bit beaten up but it looks like a back disc with a number of dots on it at the end of a cable. I have no idea what its purpose is. Also the loom has been cut from the bike so I don't have the ignition barrel etc, so I can't work out which wires were connected to that. If anybody can help with any of this I'd be very grateful.

    Cheers

    H

    cm1.jpgcm2.jpgcm3.jpg
    Last edited by Buggy; 03-29-2016 at 07:39 PM.
    Reply With Quote  
     

  2. #2 Re: Help! SO Many Wires! Pulse Adrenaline Loom. 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    As pdf
    Attached Files
    Reply With Quote  
     

  3. #3 Re: Help! SO Many Wires! Pulse Adrenaline Loom. 
    C-Moto Noob
    Join Date
    Mar 2016
    Location
    UK
    Posts
    3
    Quote Originally Posted by humanbeing View Post
    As pdf
    Thanks HB
    Reply With Quote  
     

  4. #4 Re: Help! SO Many Wires! Pulse Adrenaline Loom. 
    C-Moto Not-so-Noob
    Join Date
    Apr 2016
    Location
    Burton Latimer
    Posts
    17
    The black disc is the Gear position sensor that would have been behind the left engine cover of the bike.
    Without this you will have no neutral light or gear indicator on the dash.

    The first pic looks like the wiring connectors for the handlebar switches-starter, lights etc.
    And one may be the dash/clocks connector.
    Reply With Quote  
     

  5. #5 Re: Help! SO Many Wires! Pulse Adrenaline Loom. 
    C-Moto Noob
    Join Date
    Mar 2016
    Location
    UK
    Posts
    3
    Quote Originally Posted by RE8ELD0G View Post
    The black disc is the Gear position sensor that would have been behind the left engine cover of the bike.
    Without this you will have no neutral light or gear indicator on the dash.

    The first pic looks like the wiring connectors for the handlebar switches-starter, lights etc.
    And one may be the dash/clocks connector.
    Thanks RE8ELD0G always good to get this stuff confirmed, gives me a chance of getting it to run
    Reply With Quote  
     

Similar Threads

  1. 110cc extra wires. gear indicator???
    By arlie1180 in forum Parts Desk
    Replies: 6
    Last Post: 08-03-2015, 06:41 AM
  2. Brown and red wires?!?!?
    By ThatGuyLiam in forum Modifications (Cosmetic and Performance)
    Replies: 1
    Last Post: 02-07-2014, 04:06 AM
  3. Replies: 3
    Last Post: 01-12-2014, 02:48 AM
  4. Smoking wires when starting Kinlon 200SM
    By halfcasted in forum Maintenance
    Replies: 3
    Last Post: 01-28-2012, 09:02 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •