Adventure Motorcycle Magazine Subscribe Now

Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11  
    Banned
    Join Date
    Nov 2011
    Location
    fuck off
    Posts
    528
    Don't know as all I've found as diy was that
    Delphi would do it if you have a lot to do via the emails I sent and received


    Sent from my iPhone using Tapatalk
    Reply With Quote  
     

  2. #12 Re: Benelli 600gs overheating problem 
    C-Moto Regular
    Join Date
    Jul 2015
    Location
    Jackson Hole by GuYaJu, Yanqing county, Beijing. And sometimes west coast of Canada.
    Posts
    82
    Quote Originally Posted by NZBrakelathes View Post
    Does that or those bikes use Delphi MT05 ecu's? I am looking at the ability to remap them etc
    I can so far only find diagnostic stuff for it or very expensive from the UK software plus a very expensive flasher (3500)
    If anyone has any know how to what equipment is needed to reflash and change maps plz let me know!
    I've got a Zhongshen RX3 is like to do and another guy has a regal Raptor twin
    Both run Delphi MT05 ecu's and seems they are common in the Bennelli range of bikes too
    Here's a good starting point: http://www.rx3adventure.com/rx3_comp...agnostics.html
    In China: 2013 Benelli 600gs
    In Canada: 1980-'85 Shovester (under construction), 1983 kz440
    Reply With Quote  
     

  3. #13  
    Banned
    Join Date
    Nov 2011
    Location
    fuck off
    Posts
    528
    Cheers - I bought that canoe and software, works fine but ofcourse no remapping available
    Good info on that website too!


    Sent from my iPhone using Tapatalk
    Reply With Quote  
     

  4. #14  
    Banned
    Join Date
    Nov 2011
    Location
    fuck off
    Posts
    528
    Cable not canoe


    Sent from my iPhone using Tapatalk
    Reply With Quote  
     

  5. #15 Re: Benelli 600gs overheating problem 
    MCM Chinese fellow td_ref's Avatar
    Join Date
    Jun 2010
    Location
    Shenzhen, Meizhou
    Posts
    387
    same Delphi Mt-05 ECU to BJ250gs, looking forward to remap it.
    同志仍需努力
    Reply With Quote  
     

  6. #16  
    Banned
    Join Date
    Nov 2011
    Location
    fuck off
    Posts
    528
    Quote Originally Posted by td_ref View Post
    same Delphi Mt-05 ECU to BJ250gs, looking forward to remap it.
    Who remapped yours?


    Sent from my iPhone using Tapatalk
    Reply With Quote  
     

  7. #17 Re: Benelli 600gs overheating problem 
    MCM Chinese fellow td_ref's Avatar
    Join Date
    Jun 2010
    Location
    Shenzhen, Meizhou
    Posts
    387
    Quote Originally Posted by NZBrakelathes View Post
    Who remapped yours?
    Sent from my iPhone using Tapatalk
    No one has done it yet.
    同志仍需努力
    Reply With Quote  
     

  8. #18 Re: Benelli 600gs overheating problem 
    C-Moto Regular
    Join Date
    May 2014
    Location
    beijing
    Posts
    65
    Hey guys, so a little update, i'm still waiting on the 'extra cool coolant ' to arrive
    However, this morning i got the mechanic to install just a simple switch so that i could control the fan manually.

    This was i don't have to wait until the pre-programmed 92 or 94 degrees for the fan to kick in and then inevitably decide its had enough and then cut out for no reason.

    It seems like you literally just take the wires on of the little area on the right, insert the wire from the switch, test it works, then install the switch somewhere on the bike

    It's not a solution to the overheating problem, but it definitely helps. This way the bike has so much more time to get to those ridiculous temperatures because the fan can be effectively running all the time.
    The whole thing cost me 50 kuai, however if you're doing it yourself, its probably around 10.

    25.pic_hd.jpg26.pic_hd.jpg

    20.pic_hd.jpg21.pic_hd.jpg22.pic_hd.jpg
    Reply With Quote  
     

  9. #19 Re: Benelli 600gs overheating problem 
    C-Moto Senior Asymptomatic's Avatar
    Join Date
    Jan 2016
    Location
    Changchun China
    Posts
    240
    The first picture is of the fan that comes on your bike. It does not have a lot of room to move air and is likely pretty low power. You may want to think about upgrading to something like the second picture. They move a lot more air and are much more open. You might get some more hot air blowing on your legs but your bike will run cooler.

    Your stock fan
    Untitled.jpg

    Rovotec high powered fan
    Untitled 2.jpg

    You can check out the Fans and Kits section of Demon-Tweeks.co.uk
    Attached Images
    I have never been lost, but I will admit to being confused for several weeks"
    Triumph Speedmaster, Di ping xian da pao che 5000W, KTM Duke 390, Dayang DY150, Jencheng 150 Razkull Clone
    Reply With Quote  
     

  10. #20 Re: Benelli 600gs overheating problem 
    C-Moto Regular
    Join Date
    May 2014
    Location
    beijing
    Posts
    65
    Hey Asymptomatic,

    Thanks, that sounds like a good plan too.

    For the battery not starting the bike, i took it out and charged it at the local mechanic and then put it back in with the help of a friend.
    After we put it in, it started no problem

    The bigger fan sounds like a good idea.
    Even with the switch its still running pretty hot, but it obviously takes a while to get there.
    It seems with the thunder storms the instrument cluster has begun to fail and is waiving about constantly and the speed that it shows is randomly jumping about. However mechanically its is fine.

    Hhahah i was caught out in the thunderstorm in Beijing on Saturday evening, and the bike definitely had no overheating problems then.
    I took some video, its a bit crazy to be honest

    I am leaving to go to the UK / Netherlands for work, so will sell it back to the original owner, so i need to get it into a semi -reliable state, i think just coolant and if its not too expensive a new instrument cluster... or take it to someone who can actually fix the old one.
    I would love to be able to put all the things on it to say that i've actually FIXED this problem, but its probably not going to happen.

    Thanks guys anyway for all your help
    Reply With Quote  
     

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Benelli 600GS in White for sale in Beijing 30K RMB, 100% legal!
    By Diaveldav in forum Bike Market - Classifieds
    Replies: 7
    Last Post: 01-27-2016, 10:47 AM
  2. Overheating Kubota Z482 enduro
    By vwaudiwelder in forum Modifications (Cosmetic and Performance)
    Replies: 3
    Last Post: 09-02-2015, 01:31 PM
  3. Selling my Benelli 600GS - White
    By JackieYuen in forum Bike Market - Classifieds
    Replies: 14
    Last Post: 11-30-2013, 12:30 PM
  4. Replies: 0
    Last Post: 10-18-2013, 11:41 AM
  5. help with cfmoto v3 overheating...
    By turbo787 in forum Scooter
    Replies: 5
    Last Post: 10-15-2013, 12:06 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •