LEXMOTO XTRS 2014 HELP ALARM INSTALl

[MoAZeR]

Hi guys i got LEXMOTO XTRS 2014 need to install lexteh alarm with immobilizer but i can't find the plug and play sokcet for it i found one under the guagues but thats just for the guages when i plug it in there it don't work could you tell me where i can locate the control box or the right socket to fit the alarm


also don't know if this is the section to post

best regards
Adrian from london :)

[humanbeing]

Generic chinese stuff use square 8 pin (size ~2cm)

===
If can't p&p, tap it to the right wire(s)
+ (Alarm's energy source. U can hide it as secret as possible, theft can't find & cut at once... )/ - / Blinker(s) | [IGN off ] | + that controlled by lock s/w (example BLACK near lock / brake s/w etc) | starter solenoid (+)

[MoAZeR]

so i found this one near the headloght but when i plug it in it don't work and that is bassicaly for the speedo and is there one more of this on the bike? best regards,
Adrian

[humanbeing]

P&p connector can be found under the seat or inside the headlight...
----

[MoAZeR]

so there should be one spare one just to connect the alarm???? or can i get a splitter 8 pin??

[MoAZeR]

because i found the connector but there is only one if i disconnect it then i cant have the speedo working etc

[humanbeing]

so there should be one spare one just to connect the alarm???? or can i get a splitter 8 pin??

Some model had p&p connector, some don't . Ask local dealer/ official importer for details...

http://www.ebay.co.uk/itm/181695613981
If your vehicle hasn't got the appropriate 9-pin connector then the alarm will need to be wired directly into your vehicle's existing loom