New and in need of help

[VWNUTTA]

Hi I'm new to Forum

Has anyone got any knowledge of quinqi vista 125-2c cruiser really need some help thanks for reading

[humanbeing]

What's wrong in ur bike?
----
That bike just a Suzi clone engine jammed in a common chinese cruiser (Inspired by 1 of the JDM Suzi model. Chinese term: 风暴太子 that often powered by CG150 ZMC888 shared some ugly story in past... http://www.mychinamoto.com/forums/showthread.php?1881 ) outfit...
---
Since it looks as cruiser, i suggest put some ACF-50 to matain it's shape...

[VWNUTTA]

Hi I haven't had it long couple months and when I first got it. It would get to 70/75mph easy now after a service it struggles to get there and I have to get revs really high to get it there. Is there anything I can do to get it to go faster?

[prince666]

Sorry to hear about your bike it's a very common with Chinese bikes to start of ok then after a short time there become a bucket of shit .
75 mph is dam fast for 125cc bike ,how fast do you need to go ?
First thing you need to do is wash the bike to make sure it's all nice and clean.
Take a walk round the bike and check that no bits are sticking out which would decase the speed , if you find such items go to the local tool shop and buy a big fuck off hammer.
With great care hit the item with the hammer, but remember to keep the item for replacement later.
I have found in the past a good talking too does help , just tell the bike how great it is and how you would like to hit 80 mph this time .
Then find your sell a very long down hill road maybe a 1 in 45 should be ok.

Then make sure you are all kited out with your safety clothing.

Start the bike hold on for your life and you should hit the 75 mph you are looking for.
Best to allways get your rear end checked after the run normal you have a brown Mark around you asshole this is ok and common so don't worrie.
Well that's about it from my end on advise in this matter.

Yes hi and welcome to MCM.

[ZMC888]

Hi I haven't had it long couple months and when I first got it. It would get to 70/75mph easy now after a service it struggles to get there and I have to get revs really high to get it there. Is there anything I can do to get it to go faster?

As Prince jokingly said 70-75 mph is about as fast as a Chinese 125 can ever go. What speed is the bike topping out at now?

[ShuBen]

I would start checking basic things like carburetor setting, air filter cleaness, spark plug condition, spark plug connector, ignition coil spark cable (? ... Is that English?)
Is the exhaust free or does made mice a home there?
Is the chain easy moving or has locked up links?
Is your valve setting correct?
Has the engine suitable compression?

Sent from my HUAWEI P7-L07 using Tapatalk

[ShuBen]

.... 75mph is a lot for a 125cc Chinese bike.
I agree with Prince.

Sent from my HUAWEI P7-L07 using Tapatalk

[prince666]

All good sound advise from the other 2 members but IMO with no jokes all the checking with result in northing because "IT IS WHAT IT IS" a 125cc Chinese made bike?

[ShuBen]

yeah, true, you get what u pay for....