Thread: 650Tr clunk
Results 1 to 10 of 63
|
Threaded View
-
03-07-2018, 11:04 PM
My advise reg. checking head bearings:
Take two guys. Put the bike on a stand so that the front wheel us free. Now one guy hold the bike for safety. The 2nd pull away and push the fork legs to the engine.
If the is no play good. Now do the same thing along the steering head centre line.
No play -> very good
Finally turn the handle to both limits. Eay tutning and No grinding sound or feeling like sand or metal chips , great!
With this three direction found for good you can say its definetly not your head bearings.
Also check the greasing situation if possible.
One of the most comic thing is that people over thighten the head bearings. When they are new you nearly can't feel it, but soon they start grinding.
So better do it gentle, take a longer ride as mentioned above, and recheck afterwards with my described method.
Sent from my GN8003 using TapatalkSWM RS500R, R1200GS LC
« Previous Thread | Next Thread » |
Similar Threads
-
Cfmoto 650tr peg failure
By trebor in forum StreetReplies: 14Last Post: 01-12-2017, 09:56 AM -
What do you all use to lift the front of CF-650TR
By BigPhil in forum MaintenanceReplies: 12Last Post: 06-27-2016, 09:33 AM -
Any other WK-650TR Owners in UK
By BigPhil in forum EuropeReplies: 6Last Post: 06-22-2016, 12:19 AM -
Arrival of the CF Moto 650TR
By Shanghaifingers in forum StreetReplies: 72Last Post: 05-30-2015, 02:11 PM -
650TR,NK,TK starer problems
By 650TR Rider in forum MaintenanceReplies: 3Last Post: 04-04-2014, 05:51 AM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions