Adventure Motorcycle Magazine Subscribe Now

Results 1 to 5 of 5
  1. #1 Sinnis Apache 125 NEED A BIGBORE 
    C-Moto Noob
    Join Date
    Feb 2018
    Location
    Germany, Rhineland Pfalz
    Posts
    1
    Hello Guys! I own a German Sinnis Apache 125, a SFM Sachs ZZ 125... is there a bigger bigborekit than the 150? im not afraid to split the case... i just want to go "crazy" since the sinnis has a bad reputation in Germany due to low power and poor reliability, and i want to prove them that they are wrong! Is there a way to get more than 15hp out of it? It doenst needs to be legal.

    My Sinnis already has well over 50k km on it too, i use it for touring and i love it.IMG_20171208_175559_438.jpg
    Reply With Quote  
     

  2. #2 Re: Sinnis Apache 125 NEED A BIGBORE 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    There's 65.5mm kit in 'net. Quality varies btw seller cuz it's not as open source readily made 62mm kit
    This machinist https://shop68140890.taobao.com/ had made some solution
    Reply With Quote  
     

  3. #3 Re: Sinnis Apache 125 NEED A BIGBORE 
    C-Moto Not-so-Noob
    Join Date
    Oct 2015
    Location
    bmth
    Posts
    11
    I know you wanted bigger than 150, but 150 is good on a bike this size for torque and rideability

    http://www.mychinamoto.com/forums/sh...haft-115mm-Jet

    I have modified a SFM125 Roadster with the same K157FMI engineer, there is also a link to the place to buy the kit - this s a 124cc labelled big fin for cooling. I have done 14,000KM on it and it is good. Key points..
    You will need to find an agent to ship the item below but it is worth it!!1
    http://world.taobao.com/item/1369688...?fromSite=main


    1. You can do it in a day - this is a straight swap
    2. Torque wrench required !!!
    3. Upjet to 115 worked for me
    4. Do not take all of the camshaft cover bolts off - 2 are for the rockers!
    5. If you drop the cam chain into the crankcase-this is easily retrieved with a tent peg - it is the camshaft c-ring you should watch
    6.Exhaust bolts - change for M8 and use two nuts on each for ease
    7.Don’t forget to take the emissions connector off the barrel - it is two M6 bolts
    8.The camshaft tensioner should be removed -easy to reset the spring. -on the barrel
    9. Get 4 new Head bolts from CMPO (UK) as a precaution
    10. Get 4 new M8 nuts - 2 domed and two serrated flange for the head
    11. Remember to reconnect the Emissions pipe to your carb (comes from the vacuum unit near the front)
    12. Go for a 1:3 gearing ratio - eg 15 teeth front 45 back. This will rev out lower but given more torque and will hit 110KMH
    I also own a SFMZZ125 , I haven’t modified it yet, but is slightly easier due to clearance.
    Reply With Quote  
     

  4. #4 Re: Sinnis Apache 125 NEED A BIGBORE 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    Quote Originally Posted by dscheoff View Post
    ...[url]http://world.taobao.com/item/1369688...
    That seller seems the 1st made these kit available in chinese 'net. https://item.taobao.com/item.htm?id=531995601742 is ~40% off the above...
    Better rings https://item.taobao.com/item.htm?id=546681206119 ie. The good old [1.2/1.2/2.5] CG150 (those 1.0/ 0.8 is for newer genration piston)
    Last edited by humanbeing; 04-30-2018 at 12:57 PM.
    Reply With Quote  
     

  5. #5 Re: Sinnis Apache 125 NEED A BIGBORE 
    C-Moto Noob
    Join Date
    Jul 2018
    Location
    0121
    Posts
    2
    Quote Originally Posted by humanbeing View Post
    There's 65.5mm kit in 'net. Quality varies btw seller cuz it's not as open source readily made 62mm kit
    This machinist https://shop68140890.taobao.com/ had made some solution
    https://item.taobao.com/item.htm?spm...id=37759962405

    Is this the correct kit? Also i know LT230S camshaft will fit the pulse adrenaline so i will upgrade that, Would this give me a displacement of 190cc? BLACK GS125 XIAO correct?
    Reply With Quote  
     

Similar Threads

  1. Think I'm getting a Sinnis Apache..
    By Stevie1337 in forum Welcome to MCM!
    Replies: 4
    Last Post: 08-17-2014, 10:42 PM
  2. Sinnis apache mod
    By Bradleyrayner in forum Modifications (Cosmetic and Performance)
    Replies: 4
    Last Post: 07-02-2014, 09:50 PM
  3. sinnis apache
    By supersmooth315 in forum Parts Desk
    Replies: 0
    Last Post: 08-16-2013, 09:15 PM
  4. Sinnis Apache Main Jet
    By scouse125 in forum Modifications (Cosmetic and Performance)
    Replies: 2
    Last Post: 10-31-2012, 06:49 PM
  5. Sinnis Apache
    By JamieAldridge1 in forum Modifications (Cosmetic and Performance)
    Replies: 4
    Last Post: 09-27-2012, 07:17 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •