Thread: CFMoto's 650's
Results 1 to 2 of 2
|
-
#1 CFMoto's 650's
- Join Date
- Jun 2012
- Location
- Australia
- Posts
- 8
02-09-2019, 09:38 AM
Hi ....
I haven't visited for a while but I am giving my cf650tk a 60,000km service and plan to check the valve clearances.
The problem I have does anyone know what the clearance should be ...in the 2014 service manual for CF650-2 give the clearance in the periodic maintenance section P2-19 as EX 0.22-0.31mm IN 0.15-0.21mm BUT in the Engine Top end section P5-6 Tech specifications shows the Valve clearance as EX 0.20-0.26mm & IN 0.08-0.13mm.
Checking a service manual for a Kawaski ER6 shows the first figures in both sections.
I haven't removed the cams yet but a quick check shows that I need to adjust the clearances and I believe that the shimming arrangements are different. I am a little unsure what the clearances should be as the manual seems to be a copy of the Kawasaki in most parts so may not reflect what they should be!
Regards and safe riding to all ...
-
#2 Re: CFMoto's 650's
02-19-2019, 01:51 PM
Exhaust: 0.22~0.31 mm (0.0087~0.0122 in.)Intake:0.15~0.21 mm (0.0059~0.0083 in.) is correct according to the mechanic here.
“I have never been lost, but I will admit to being confused for several weeks"
Triumph Speedmaster, Di ping xian da pao che 5000W, KTM Duke 390, Dayang DY150, Jencheng 150 Razkull Clone
« Previous Thread | Next Thread » |
Sourcing Replacement/Upgrades for...
02-10-2019, 12:46 PM in Parts Desk