Hi
I have swapped engine in my bike and me engine is dc cdi and it's stator has 12 poles coils.
It had 3 wires coming from its stator yellow color and two words from the pulsar coil. The yellow wires were slightly short and brittle so I replaced them.

No I have brought a 3 phase regulator. The regulator has two connectors each had three wires
One g connector has 3 yellow wires and other has o one green one red one black.


Can I connect any yellow to any yellow or thos had to be specific? In that case I would need to know how to trace the wires.


Earlier I connected the three wires to charger rectifier and didn't connected its other cables to battery and as soon as I revved the engine the rectified blasted probable its capacitor.. What could be the reason for that too?

Regards