Results 6,021 to 6,030 of 6336
|
-
#6021 Re: 2010 DF250RTB Stator?05-28-2017, 02:26 AM
ie. EBC FA086 or equivalent
the Made in Taiwan also not that expensive http://www.ebay.com/sch/m.html?_odkw...ake&_nkw=ld125Last edited by humanbeing; 05-28-2017 at 03:58 AM.
-
#6022 Re: 2010 DF250RTB Stator?05-28-2017, 04:09 AM
thanks Mr Being, I'll definitely pay more for a better brake pad, stock are horrible.
but if you really want to save a buck: http://www.ebay.com/itm/272652455627
so what do you know about the sprocket studs? are not the genuine Honda parts gray rather than yellowed?
we're snapping them like crazy around here...
-
#6023 Re: 2010 DF250RTB Stator?05-28-2017, 05:39 AM
低處未見低,賤物鬥窮人 http://www.ebay.com/itm/111477736195
Parts house sold stronger [加 add 硬 hard 自 self 鎖 lock 型 type] version to mechanics
-
#6024 Re: 2010 DF250RTB Stator?
-
#6025 Re: 2010 DF250RTB Stator?05-29-2017, 12:45 AM
When i call a Honda dealer, they gave me this part number. so I am not sure if they are actual Honda or not, but the part number is. They seem to last a while. I mean I have 25,560 miles on the bike, and the studs in there have been on it for most of that after the factory ones broke. Yeah I replaced one a month ago, but they do not last forever.The bushings are like new as well. so I am happy.
-
#6026 Re: 2010 DF250RTB Stator?05-29-2017, 02:00 AM
-
#6027 Re: 2010 DF250RTB Stator?05-30-2017, 01:21 AM
Rear stud-bolt.jpg
Honda Part number 90128-382-670 is what I used in my DF.
http://www.hondapartshouse.com/oemparts/p/honda/90128-382-670/bolt-driven-sprocket-fixingVince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#6028 Re: 2010 DF250RTB Stator?05-30-2017, 01:45 AM
alright so i assume they are holding up well and look a yellow alloy... my suspicions may well be wrong
I went ahead and bought a set of 90128-446-770, the old part number thinking this way i can ID the part is genuine or not...
I also often search the cross part number to get the best price possible... fwiw i got these studs shipped for 3.75$ each
i was tired of making and breaking studs, i suspect my 4140 pre hard (pre hardened rod) was not actually 4140 pre hard...Last edited by axa; 05-30-2017 at 02:57 AM.
-
#6029 Re: 2010 DF250RTB Stator?05-30-2017, 03:15 AM
I installed the Honda studs when I changed the sprocket back in 2012 or so and they are still in there.
Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#6030 Re: Dong Fang DF 250 RTB Bobber Information05-30-2017, 05:21 AM
So right before ordering new brake pads, i decided to take a quick look and confirm i actually needed them...
well as my luck has gone with this bike, the pads are fine...
looking at the caliper it was dry no leak, took off the reservoir cap, it was full to the brim, so no leak....
noticed the 2 year old DOT3 fluid i put in there was already dark, changed it... bled the brakes still couldn't build pressure.
pulled off the caliper, squeezing the brake i see the pads move a bit together, release i see the pads move back...
Now I've never needed to diagnose this type of problem before but seems to me that the pads should continue to move together with each squeeze and not back out with release...
so chances are the Master Cylinder pump is bad.
i have to look into it to confirm but anyone know where i can get a rebuild kit, ie a new master cylinder piston/seals...
call out to humanbeing....
fwiw here is an entire part advertised specifically for the dong fang but if you notice they advertise the same part for many bikes...
id like to rebuild and reuse as i had custom machined adjustable levers... and dont want to sacrifice that or have to do it again...
im thinking if a rebuild kit cant be sourced due to compatibility questions, something like this might be locally sourced and cheap2012 DF250RTB_B with Yamaha XV250 V-twin
1998 XVS650 (For Sale)
2003 LS650 with Voodoo Vintage hardtail
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |
комедии 2024 русские
04-29-2024, 07:03 AM in Off Topic Discussions