Re: Qingqi QM 125 wont start
a) check battery power (broken cell -> may result in sudden death)
b) if battery ok -> unscrew the spark plug or use a 2nd one in the connector and check if you get a spark
c) if spark OK -> check fuel supply -> carburetor? -> check the jets
d) also check your air filter as good practice
If you have a EFI bike -> get to the garage and let it check/change
Re: Qingqi QM 125 wont start
Quote:
Originally Posted by
ShuBen
a) check battery power (broken cell -> may result in sudden death)
b) if battery ok -> unscrew the spark plug or use a 2nd one in the connector and check if you get a spark
c) if spark OK -> check fuel supply -> carburetor? -> check the jets
d) also check your air filter as good practice
If you have a EFI bike -> get to the garage and let it check/change
Hi, hi have alreadycheck all of that, but the problem is that hi dont have any power in the bike, nothing, not even the dashboard lights, i already have tested the batery, the mass wires, the cdi, the coil, im inclined to the clutch sensor, what do you think, anyway thanks for the answear
Re: Qingqi QM 125 wont start
Measure all cables. Something cut off / broken and didn't found yet?
Another thing that i had once was a broken fuse ..... and you couldn't see that. So it took me quite some hours until i got desperate, removed all fuses and measured them one by one with voltmeter against a small battery.