Thread: Zennco YB125 speedo housing
Results 1 to 2 of 2
|
-
#1 Zennco YB125 speedo housing02-14-2010, 05:17 PM
I have a problem with the speedo cable housing on the wheel of the bike. The grub screw that holds the brass screw housing in has dropped out.
It looks as though its a really small one that was in there, but I have no idea of size/length it was to replace it!
Any ideas? Thanks!
-
#2 Re: Zennco YB125 speedo housing02-15-2010, 06:18 PM
Problem now sorted. After tapping a small pin through the hole where I thought a grub screw was located, I pulled it back out to find a roll-pin (split pin) wrapped around the pin! Looks like the pin itself has turned around to the split side and stopped it gripping the brass speedo housing. Now turned around with a small pin holding it all nice and tight.
« Previous Thread | Next Thread » |
Similar Threads
-
Zennco YB125 info
By China Crisis in forum Parts DeskReplies: 13Last Post: 02-01-2012, 05:42 AM -
zennco super motard yb 125cc manual
By mesy in forum Parts DeskReplies: 11Last Post: 10-12-2009, 10:13 AM
The Pillars of Salubrity:...
05-12-2024, 12:12 PM in Off Topic Discussions