Thread: TMEC 200 ENDURO
Results 1 to 3 of 3
|
-
#1 TMEC 200 ENDURO12-05-2012, 02:07 AM
After several years, found a TMEC 200 Enduro for $800 US. Good condition, low miles. Looking for a higher gear rear sprocket (lower numerically) if they exist. UK TMEC owners could verify that a replacement sprocket is based on the Derbi Senda 125; if so, are there any sprockets in the 30 tooth range, or up to mid-40?
-
#2 Re: TMEC 200 ENDURO12-05-2012, 04:12 AM
"JT" is 48 ONLY.
Does the stock had some marking? We can find who makes it & availability of smaller sprockets via those hints.
Otherwise u need "specialist" made it to this spec.
Last edited by humanbeing; 12-05-2012 at 05:38 AM.
-
#3 Re: TMEC 200 ENDURO12-06-2012, 03:32 AM
Thanks, humanbeing. It seems that there weren't as many aftermarket sprockets for Derbi as Honda. It looks like the 48 is
The one to get. I know they can be made to order, and if it costs about the same to custom order one as getting one from the UK, might be worth considering.
« Previous Thread | Next Thread » |
Similar Threads
-
tmec 125 enduro parts
By cchristheman in forum Modifications (Cosmetic and Performance)Replies: 10Last Post: 12-25-2014, 06:43 PM -
2009 TMEC 200cc Enduro TMEC200-1
By vacationtime247 in forum Dirt n' Dual-SportReplies: 50Last Post: 09-27-2013, 04:34 AM -
tmec 125 enduro owners manual and workshop manual
By cchristheman in forum Parts DeskReplies: 1Last Post: 05-12-2013, 08:14 PM -
Cheap Enduro or SM in the U.S.?
By Coloradogoose in forum Dirt n' Dual-SportReplies: 17Last Post: 08-29-2012, 03:47 AM -
help tmec 125-1
By chow245 in forum Modifications (Cosmetic and Performance)Replies: 0Last Post: 08-26-2010, 05:12 PM