Results 1 to 10 of 10
|
-
#1 Chain and Sprocket Set Pioneer XF200-2V09-02-2010, 11:11 PM
Hello
I am currently having difficulty locating a front (engine) sprocket for a Pioneer XF200-2V.
This bike is made by Qingqi and was also known as the CG200 when it was first sold on Ebay by BTS Motorsport.
The front sprocket has 16 teeth and the mounting hole has 13 inner teeth.
This 2006 model has the CG125 look:
Regards
Jim
-
#2 Re: Chain and Sprocket Set Pioneer XF200-2V09-03-2010, 07:32 AM
Pioneer = Releated to Qingqi. Qinqqi had a LONG releation w/ Suzuki.
Sprockets for Suzi seems fits ur descption. Pls check "JT Sprockets"'s site / Front: JTF432 Rear: JTR810Last edited by humanbeing; 09-03-2010 at 09:06 AM.
-
#3 Re: Chain and Sprocket Set Pioneer XF200-2V09-03-2010, 12:43 PM
I have checked out the JT Sprockets site and the only front sprockets with 13 inner teeth I can find (JTF1439 etc) are for a 520 chain.
This one is actually for a Quad bike: http://www.jtsprockets.com/fileadmin...ge/jtf1439.jpg
My bike has a 428 chain.
I would need to find a rear sprocket for a 520 chain which would fit my rear wheel.
It would have to be a 520 version of the JTR810, unless I can get the correct rear sprocket.
http://www.jtsprockets.com/fileadmin...rge/jtr810.jpgLast edited by jimwelsh; 09-03-2010 at 12:49 PM. Reason: more info
Regards
Jim
-
#4 Re: Chain and Sprocket Set Pioneer XF200-2V09-03-2010, 03:16 PM
Good reference:
http://www.mychinamoto.com/forums/showthread.php?384
Unless the front "F... up" just don't bother it. Rear ONLY seems saves $$$.
http://item.taobao.com/item.htm?id=2637196228
Qingqi Geniune parts for the 1st genration "QM200GY" 428: 13/56 | 15/48
13T http://item.taobao.com/item.htm?id=5126779569
15T http://item.taobao.com/item.htm?id=7216920679
==
The original XF200-2v is using Suzuki clone engine
http://www.jnxfmotor.com/products/xx.asp?id=115Last edited by humanbeing; 09-03-2010 at 11:04 PM.
-
#5 Re: Chain and Sprocket Set Pioneer XF200-2V09-04-2010, 12:40 AM
Hi.
Thanks for the useful links.
The only UK supplier I found that has a similar front sprocket is Bike Alert.
http://www.bikealert.com
Problem is, this one has a bush.
Hello Jim, I would say the rear sprocket is JTR810 and the front is possibly JTF409, though if the front sprocket is flat and does not have a boss I cannot match it.
Please find drawings which should help to determine if these are correct.
http://www.jtsprockets.com/61.0.html?&L=0&sel_artnr=JTF409.16
http://www.jtsprockets.com/61.0.html?&L=0&sel_artnr=JTR810.46
I hope this helps.
Best Regards, Jim Irwin Bike Alert Plc
Regards
Jim
-
#6 Re: Chain and Sprocket Set Pioneer XF200-2V09-04-2010, 09:42 AM
Pay the ransom to Yanks http://www.mychinamoto.com/forums/sh....php?384/page4 for 16T
OR just leave it to 15T(Source it in taobao.com via pal/agents in China IF u can't find locally)/42T "cheap" config
-
Newer Qingqi w/ same Suzuki 200cc clone fitted w/ JTF409 compitable sprocket
http://item.taobao.com/item.htm?id=5476884335
-
QM200-2V "parts"Last edited by humanbeing; 09-04-2010 at 01:18 PM.
-
#7 Re: Chain and Sprocket Set Pioneer XF200-2V09-04-2010, 10:34 PM
Hello
Thanks once again for the info.
I reckon the easiest option would be the USA supplier: http://sprocketspecialists.com/Produ...roductID=15639
If I ordered 2 front sprockets, they would probably last the life of the bike, and I might save on the delivery charge.
The rear sprocket is available in the UK so that's not a problem.
My existing front sprocket is 7mm thick and the JT409 is is 11.5mm thick.
If I removed the washer from behind the sprocket, it would give me an extra 2mm so, by reversing the fixing nut (which has a rebate on one side) I could gain further 2mm. This way I could get all of the nut on the thread.
sprocket_nut_xf200.jpgRegards
Jim
-
#8 Re: Chain and Sprocket Set Pioneer XF200-2V09-18-2010, 12:20 PM
I have now got replacement Sprockets
These are from http://www.cmpo.co.uk
Front: RMR200 428-15T Part Code 30214*1442*RMR200
Rear: RMR200 428-41T Part Code 30214*1442*RMR200
The Rear sprocket has 41 Teeth instead of 45 but this is not a problem as the gearing will be less than 10% higher.Regards
Jim
-
#9 Re: Chain and Sprocket Set Pioneer XF200-2V09-20-2010, 12:30 AM
CMPO is quite expensive -- UNLESS can't find parts from elsewhere / The REAR can bought at
http://www.gingerparts.com/products/jtr810-41
-
#10 Re: Chain and Sprocket Set Pioneer XF200-2V09-22-2010, 12:02 AM
Wow! That is cheap. I might even buy one. That's around 75% cheaper.
Thanks for that one.Regards
Jim
« Previous Thread | Next Thread » |
Similar Threads
-
Pioneer,Pulse thing, what exactly is it ?
By Sprocket in forum Dirt n' Dual-SportReplies: 10Last Post: 04-24-2015, 03:30 PM -
SPARE PARTS FISH OR DIRT RIM SET!
By BUBBA ZANETTI in forum Parts DeskReplies: 3Last Post: 05-08-2010, 07:32 PM -
How to set timing? ZongShen ATV
By wilkins1981 in forum MaintenanceReplies: 5Last Post: 04-03-2009, 01:06 PM -
Qingqi QM200GY (Qlink XF200) drive chain tensioner
By forchetto in forum Modifications (Cosmetic and Performance)Replies: 3Last Post: 02-23-2009, 06:04 PM -
Qlink XF200 44 tooth rear sprocket.
By volksjagger in forum Modifications (Cosmetic and Performance)Replies: 13Last Post: 12-16-2008, 05:16 AM
Tags for this Thread |