Results 1 to 4 of 4
|
Hybrid View
-
#1 CCM230 and maybe Loncin LX250 de cork !
- Join Date
- Feb 2011
- Location
- UK
- Posts
- 96
04-03-2011, 10:03 AMFound the intake of my CCM230 had a "restrictor" pushed into the airbox intake that cut down the available intake area to about 25% of the original size .inlet.jpg
With it removed inlet2.jpg
I put a 120 main jet in , from Scooter Assassins , and the bike now goes much better - pulls better throughout the rev range , cannot say its any faster as it is still running in and revs out in top gear despite the +1T front sprocket .
If you have this in your air intake to the filter box take it out but make sure you upjet to suit - mine was a guess at 120 but seems about right - have also removed the EGR/air injection gubbins too .
-
#2 Re: CCM230 and maybe Loncin LX250 de cork !04-04-2011, 11:48 AM
Interesting. I have similar TICs in my bike. Will have to think about giving the engine more air and fuel.
-
#3 Re: CCM230 and maybe Loncin LX250 de cork !
- Join Date
- Feb 2011
- Location
- UK
- Posts
- 96
04-04-2011, 06:12 PMYep , most bikes have an intake silencer or snorkel but this is the first bike I have had where it was an obvious "restriction" . I am not usually too much into "tuning" as the designers pretty much know what they are doing ! Though the Chinese bikes do give you more scope for genuine improvements than the average !
-
#4 Re: CCM230 and maybe Loncin LX250 de cork !04-05-2011, 12:18 AM
good to know bojer, something to keep in mind as I start to play with these Chinese vehicles
Gardo northern NJ/NYC
CCW tha Heist tha Widow
CCW tha Misfit (tha Wraith)
50 State legal and Worldwide
CCW Heist Riders
« Previous Thread | Next Thread » |
Similar Threads
-
Loncin LX250 "T-Rex" Cruiser
By CrazyCarl in forum StreetReplies: 4Last Post: 01-31-2018, 10:25 AM -
Hi from UK - CCM230 / LX250 Owner !
By bojer in forum Welcome to MCM!Replies: 22Last Post: 03-27-2011, 09:55 PM -
Hi, new rider needs help with Loncin!
By pedro in forum Welcome to MCM!Replies: 2Last Post: 07-22-2009, 02:53 PM -
Loncin on the Move!
By CrazyCarl in forum Industry News and Moto TalkReplies: 12Last Post: 11-19-2008, 10:46 PM -
Loncin Canada
By Jim in forum Manufacturers and ImportersReplies: 16Last Post: 06-29-2008, 08:55 PM