ZONTE

[moilami]

The Frames on these are manufactured with robotic welders.

"All automatic robot wielding technology combined with Low splash welding technology make the frame of Zontes250-S never to be welding deformation. What’s more, it is clean inside the frame to form a natural sump."

This looks awesome. Just too bad China Bikes tend to glass pearl smoke and mirrors shiny.

[MJH]

Kiden is a registered trademark of TYAN

[MJH]

Zontes UK has a blurb on its face book page for the S250, they are realistic that the over 125cc will not sell as well but remain committed to offering it in the UK, working on pricing. There are always comments on the colors and the headlight. It is a design that is polarizing in a segment that is not high volume.
Zontes should consider developing a 125cc engine that hits the legal upper limits of the class in horsepower and power to weight. The next level for them should have been that, a line of higher performance 125cc models.
The DRZ250 engine could be offered in more forms, more models, which could potentially maximize sales of it within its respective classification.

[MJH]

Zontes are not listed as a brand on CMPO, why is that?
I thought the L class was limited to 125cc, so what engine is in the Zontes 125 models sold in the UK, is it a 156FMI-A?

[MJH]

JUNAK 121 Tianhu 125-3-01 prod. China





Engine: Capacity: 125 cc, 1-cylinder, 4-stroke, air-cooled - HJ156FMI.
Power: 11.8 hp (8.7 kW) 8000 r / min.
Clutch: multidisc - wet
Transmission: 5-speed manual
Starter: electric / pedal
Brakes p / p: Hydraulic - Disc / mechanical - reel
Wheels p / p: 3.00 x 18 / 110/70 x 18
The dimensions (length / width / height): 1950/770/1120 mm.
Wheelbase: 1320mm.
Weight On / Total: 110/260 kg.
Available Colours: burgundy, graphite.
Price: 5199.00

[MJH]

http://www.tayomotor.com/ProductShow3.aspx?ProId=55140

There are different versions of the engine, for instance the Lexmoto Assault has a HJ156FMI-E?

You have to wonder when output for a 125cc single OHC begin to seem unusually high for that displacement. The specs on the HJ156FMI-A are close to the output of a 125cc four valve Hyosung Karion, and of course since that HJ156FMI-A is actually a 139cc it can be close to that engine.

[fredjaw]

Hello You all,
About Junak, I also see the same bike braned Junak and another brand in Poland.
Mine is always operating well and is more than 17000km on clock.
I even still have the quite poor original tyres from Cheng shin but my way to rive is very ol fashion and can use it.
I try to get parts in the case I would need (no retailer here).
Fred