Thread: TBR Z50JZ Supermoto
Results 1 to 10 of 17
|
-
#1 TBR Z50JZ Supermoto
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
11-01-2011, 10:37 AMG'Day,
A good mate had to relocate back to his home country and left me his kids Jincheng Z50JZ replica bike behind, good starter bike for the 8" Z50JZ Supermoto bike project as the bike is already regoed and fully licensed for road use.
-
#2 Re: TBR Z50JZ Supermoto
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
11-01-2011, 11:33 AMG'Day,
Started a custom 8" Honda Z50JZ Supermoto project a couple of weeks ago, using a MIC "cheap as chips" Z50 replica frame for test fitting custom one-off and modified parts.
-
#3 Re: TBR Z50JZ Supermoto11-02-2011, 03:30 PM
are you going to fit a big bore and rotor kit onto it?
-
#4 Re: TBR Z50JZ Supermoto
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
-
#5 Re: TBR Z50JZ Supermoto11-03-2011, 09:48 AM
looks mint mate, a friend of mine with a 140cc supermoto race pitbike fitted the front brakes caliper off a KTM 85SX very very powerful especially as its such a light weight bike but if you go that route dont buy one thats says its made for a KTM as there more expensive than the same brembo caliper used on Yamaha's they just arent as colourful
-
#6 Re: TBR Z50JZ Supermoto
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
11-04-2011, 04:55 AMG'Day,
Pitbikes are a different due to 10",12",14" wheels, many different brake calipers will fit easily without modifications.
Will be using 8" wheels and brake caliper choices are quite limited due to size to one piston / two piston calipers: Brembo, AP-Racing, Nissin, Tokico or one-off custom CNC brake calipers.
G-Craft Alloy Rear Disc Brake Hub (CNC)
G-Craft alloy 3.5" wheels (front / rear) with Bridgestone Battlax BT390 3.5x8" tyres.
G-Craft +40mm alloy swingarm, rear G-Craft alloy hub (disc brake), CF-Posh alloy rear sprocket, Custom CNC alloy brake caliper stay.
-
#7 Re: TBR Z50JZ Supermoto11-04-2011, 10:41 AM
hmmm at most iv only seen 12'' wheels racing in the supermoto classes over here in the UK mostly using these mag wheels
http://www.ooracing.com/store/index....productId=3330
-
#8 Re: TBR Z50JZ Supermoto
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
-
#9 Re: TBR Z50JZ Supermoto
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
11-06-2011, 02:53 AMG’Day,
Test fitting a Shift-Up / Japan main stand to be used on the 8" Z50JZ Supermoto bike later on.
-
#10 Re: TBR Z50JZ Supermoto
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
11-07-2011, 06:58 AMG'Day,
Fastway foot pegs installed, they are by far the best footrests I have come across so far.
Added a little stop for the G-Craft alloy rear disc brake lever while modifying the footrest bracket for the Fastway pegs.
« Previous Thread | Next Thread » |
Similar Threads
-
Supermoto from the Philippines
By ryan tan yu in forum Welcome to MCM!Replies: 24Last Post: 09-29-2011, 09:51 PM -
Can a Genesis GXT 200 BA supermoto be lifted?
By masterodisaster in forum Dirt n' Dual-SportReplies: 2Last Post: 05-10-2011, 11:20 PM -
Supermoto decals
By Cab4less in forum Modifications (Cosmetic and Performance)Replies: 0Last Post: 03-14-2011, 03:21 PM -
I want to buy a supermoto in China
By Davie in forum AsiaReplies: 2Last Post: 06-08-2010, 09:34 AM -
HI..My kreidler supermoto dd
By Overdose no WC in forum Welcome to MCM!Replies: 4Last Post: 05-31-2010, 12:46 AM