Thread: Yingang YG3R Clutch replacement
Results 1 to 3 of 3
|
-
#1 Yingang YG3R Clutch replacement
- Join Date
- Apr 2012
- Location
- United States
- Posts
- 2
01-08-2013, 01:04 AMHello!
I am starting to think that my clutch is on the go on my YG3R, whenever I rev above 7k, I start to slip. I thought it was the oil or a cable adjustment, but I have adjusted my cable properly, even with some slack and changed my oil to Motul non synthetic, rode for about 500km and it did not do the trick, I am still slipping at high RPM. Strangely, there is still enough grip for stoplight wheelies. I must admit that I wheelie with a 5k clutch drop.
I have read somewhere that the clutches from my YG170MM engine are identical to a Honda CBR250 (the newer, single cylinder one). Is this true? If not, where can I get replacement clutches for my YG170MM?
Thank you!
-
#2 Re: Yingang YG3R Clutch replacement01-08-2013, 05:56 AM
As I know, Yingang engine is a clone of the Honda AX1/Dominator 250 engine.
Before replacing friction plates, maybe you could try to replace stock clutch springs with a new set. Or, cheap ass remedy for slipping could be adding washer under each clutch spring, thereby increasing pressure on the plates.Ask me nothing - I DO NOT speak english. Really...
-
#3 Re: Yingang YG3R Clutch replacement
- Join Date
- Apr 2012
- Location
- United States
- Posts
- 2
01-08-2013, 01:59 PMThank you! I did some research and as far as I cam tell from all the pictures I found online, the 1990 NX250 engine seems to be a match.
http://en.wikipedia.org/wiki/Honda_NX250
I ordered my clutch kit today, it was only 47 dollars. Hopefully it fits, if not, I will have to add washers to my springs.
Thanks a lot for your help!
« Previous Thread | Next Thread » |
Similar Threads
-
Yingang
By MJH in forum Industry News and Moto TalkReplies: 45Last Post: 06-20-2014, 09:28 PM -
New Yingang Motorcycles
By Deom2i in forum Industry News and Moto TalkReplies: 25Last Post: 06-10-2013, 12:10 PM -
cam / timing chain replacement
By ulikedat in forum MaintenanceReplies: 11Last Post: 11-28-2012, 03:11 PM -
YINGANG USA
By MJH in forum Industry News and Moto TalkReplies: 12Last Post: 09-24-2012, 01:02 PM -
Yingang YG150-F
By Wolfman in forum Dirt n' Dual-SportReplies: 16Last Post: 05-17-2012, 01:52 AM
Tags for this Thread |
MedMastery: Mastering Medicine...
Today, 03:26 AM in Off Topic Discussions