CFMoto 650TR headlight access

[linuxyeti]

Hi all

Just to make sure I don't do something not needed, when the headlights are on, both should be lit? I only ask, at the moment only one is lit, however both are lit when full beam is switched on. I have a feeling I'm goning to have to go through the process listed above, unless of coyrse my headlights are behaving as they should!!!

Cheers

Tony

[prince666]

Hi all

Just to make sure I don't do something not needed, when the headlights are on, both should be lit? I only ask, at the moment only one is lit, however both are lit when full beam is switched on. I have a feeling I'm goning to have to go through the process listed above, unless of coyrse my headlights are behaving as they should!!!

Cheers

Tony

All are working fine Tony low beam 1 on , full beam both on ??

[linuxyeti]

Hi yes

That's good, wasn't looking forward to having to go through the process above :-)

[bikerdoc]

Hi all

Just to make sure I don't do something not needed, when the headlights are on, both should be lit? I only ask, at the moment only one is lit, however both are lit when full beam is switched on. I have a feeling I'm goning to have to go through the process listed above, unless of coyrse my headlights are behaving as they should!!!

Cheers

Tony

Tony, Prince666 is correct... however you could have found the answer simply enough yourself by reading the thread linked in my first post of this thread... which if you'd clicked the link to the CF650 HID upgrade thread... there's even a photo of the 650TR with one headlight illuminated, and an explanation underneath it.
It's worth noting that many questions you and others might have are likely already answered... if one takes a minute or ten to read various threads and posts.

Just like on many bike forums... the answers that most seek are already documented. It just takes time and patience to read through verbose to find the gems one seeks.