Hi Phil
I replaced headstock bearings with taper bearings.....new wheel bearings too.....a friend (who is more knowledgeable about bikes than me) stripped the fork legs down....minimal wear on bushes....and put new oil seals in..
I have checked everything I can think of.... calipers..... rotors....even looked for loose components on the front of the engine....radiator.....any bracketry....all seem fine.
But as said I still get the clicking......wher as before it was a loud Clunk.........so on that assumption it must be one if the parts I replaced or adjusted.
So iam happy to use it with just the occasional click..
I am still only on just over 5,000 miles! ��