My blog of a Jetmax 250

[WirralGhostHunter]

If they do their job better than the old ones - xenon or not. you achieve your goal, which is most important. Is'n it?

This is true :o)

I see that the little retaining clip that I commented about in my Jetmax review has not been redesigned.

Maybe on the Jetmax v2

Just keep in mind that you might have to be mindful of the wiring used for the headlights etc and whether or not they are designed to take the increased draw that the higher rated bulbs will incur. I found that out by swapping the stock standard 35/35W Halogens for some beefier 90/100W ones. The draw was too much and the wiring proceeded to melt as did the plastic 3 pronged connectors to the bulbs. Replacing the wiring harness means having to buy the headlight assembly which in turn means buying the fairing (tupperware) that houses said headlight too.

Thanks for the heads up on that one, I will watch that..

BTW, your goods will likely be with you soon Mr WirralGhostHunter :)

woooo hooooo.... Thanks for that bikerdoc I will post my progress right here