Ok check out all the links, That’s some pretty custom looking stuff Skullworkz! You will probably have everything installed the day they all come in to boot.
Today I just installed my battery tender plug in socket hopefully ( I think) properly by lining the battery box and terminal openings with Plastic u channel and running the wires were they hopefully never short out again. That alone took me 3 hours to figure out how to prevent future problems and get a clean look.
- My bud is bringing his Black DF over to start polishing and moding it. He has a 2 car Garage that is too full to get at it.
- Last night I rubbed my whole bike out using Scratch Doctor compound/ in the small orange bottle at Wal-Mart or any store/ it’s an extremely fine polishing compound you just apply to a 100 percent cotton Rag and use elbow grease. That really brought out the shine of the clear coat and the black on the engine and rims/ spokes/ chrome. I also did the frame, while still satin flat it has a bit of a sheen that will be easier to wash ( what a difference it made on the whole bike ) Made the paint look very rich deep and expensive. I am amazed at how thick the clear coat is on these bikes.