Something is causing my battery not to get a charge. I have tested the wires coming from the stator before they plug into
the rectifier with a multimeter and it shows that the stator is putting out a charge. I have also replaced the
rectifier thinking that was the problem and I also tested the output from the rectifier with the multimeter. I have
checked all the wires i could to see if any of them is sorting out and there is nothing sorting out. Is there anything
else i could check that may be the problem that keeps killing the battery? What else does the charge go through before
reaching the battery because I see no wires running from the stator or rectifier to the battery but I do see two wires that
run to the solenoid that i dont know where they come from, could those two wires carry the charge from the stator to the
battery?
Any help would be nice before I pull the whole wiring harness and running all new wires