Quote Originally Posted by barnone View Post
From my ex 2010 bike "Manual and sticker on frame both say .06mm intake and .08mm exhaust."
http://www.mychinamoto.com/forums/sh...rmation/page13
Better a little loose than too tight.


You need to check your valves ASAP. You can have engine damage if they are tight like mine were.
I had no clearance on mine when I uncrated the bike. Others here have also reported the same lack of clearance on their 2012s. You will suffer power loss if the valves don't close.

Plug looks like you are running too lean to me. I need to check mine as I went up to 108 main jet from my stock 105.

But adjust your valves before you ride any more. Get an experienced friend or independent shop to help you.

Okay ill check the valves this weekend. your 2012 had a 105 stock? What type of jets do these use because i have a bunch left over from a gy6 motor.