Thread: CF650 flat spot? on 2800-3000RPM
Results 1 to 10 of 10
|
Threaded View
-
#1 CF650 flat spot? on 2800-3000RPM
- Join Date
- Jun 2013
- Location
- Hanoi, Vietnam
- Posts
- 182
03-06-2014, 12:59 PM
I have had like flat spot in about 2800-3000RPM it works smooth under that and over that. but if I hit that magic rev zone bike will start to stumble/sputtering.. it feels like.. hell not sure.. if you rev fast from idle to higher RPM range its ok.
If I just rev engine and try to hold it 3000rpm you can clearly hear exhaust making sputtering noises.
but it's not stick coils as I did try different ones already,cleaned the tank pump.. lots of rust btw... :/
It also has new fuel inside (as I did run it empty by accident, if bike can't hold idle.. do check before taking tank off that there is fuel in the tank..)
This problem has been already long time and really start to annoy me only if I am in traffic and have to hold that speed :) really hate that sound and jerkiness of the bike at that moment.
« Previous Thread | Next Thread » |
Similar Threads
-
CF650 Service Manual
By choldy in forum MaintenanceReplies: 9Last Post: 05-12-2021, 09:32 AM -
CF650 After Market
By choldy in forum StreetReplies: 15Last Post: 08-18-2015, 05:50 PM -
Bikerdocs' 650TR (CF650-2) review
By bikerdoc in forum StreetReplies: 58Last Post: 05-30-2015, 02:41 PM -
Cf650 Coolant Leak
By choldy in forum StreetReplies: 8Last Post: 09-01-2013, 12:21 PM -
Flat tire
By Fred in forum MaintenanceReplies: 3Last Post: 05-09-2011, 07:47 AM