Results 1 to 7 of 7
|
Threaded View
-
#1 CFMOTO 650 slip on exhaust popping fix
- Join Date
- Sep 2015
- Location
- Taiwan
- Posts
- 22
09-24-2015, 10:29 AM
This mod doesn't completely fix the problem but does indeed cut down the popping of the exhaust. Mine was so bad that every pop would send out 4 inches of fire which looks cool but not good for the engine or the police around you.
It was my mission to solve this problem as I didn't want to be getting into trouble with the police here in Taiwan. I think what causes the problem on our bikes is there is unwanted air entering the intake somewhere so I went about trying to find it, which I did and it was in plain sight.
On the side of each throttle body there is a rubber hose that comes from the breathing system on the bike, I guess its for emissions etc, so I took off the pipes and put small ball bearings in each side then slid the pipes back on..............hey presto no more flames and no more ear bursting pops.
Like I said this mod helps with popping but doesnt cure it, I still get the odd pop now and again but its alot quieter and less often.
I've included a picture and highlighted the pipe in green.7968525.jpg
« Previous Thread | Next Thread » |
Similar Threads
-
Exhaust popping issues after installing 150 cc big bore kit
By Biker1234 in forum Modifications (Cosmetic and Performance)Replies: 5Last Post: 09-16-2013, 12:25 AM -
After market slip on pipes
By pommie in forum Modifications (Cosmetic and Performance)Replies: 3Last Post: 09-11-2013, 03:49 PM -
Slip on exhaust
By kieronh84 in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 05-19-2013, 11:28 AM -
New QingQi200GY/XF200 Slip-on pipe!
By volksjagger in forum Modifications (Cosmetic and Performance)Replies: 38Last Post: 08-19-2010, 05:03 AM -
New QingQi200GY/XF200 Slip-on pipe!
By volksjagger in forum MaintenanceReplies: 24Last Post: 02-28-2009, 01:19 PM