Results 1 to 5 of 5
|
Threaded View
-
#1 GY6 150cc starts/idles fine but bogs under throttle
- Join Date
- Jun 2014
- Location
- USA
- Posts
- 19
02-24-2016, 02:22 PM
The other day I turned from a light, went full throttle up to 50 MPH, then when I came to a light I let off the throttle and felt the motor drag abnormally hard. Once I stopped it seemed to be running fine but when I accelerated from the light it wouldn't go. Only a very tiny amount of throttle worked and I had to ride home barely being able to move.
So it starts perfectly, cold weather, warm, whatever and idles great like normal and if I twist the throttle quick it gets power at first then quickly bogs down and dies unless I let off the throttle.
At first I thought it might be the auto-chock/enricher but I tested that and it's working fine. I checked over the motor and all looks good on the outside as far as hoses, etc. Someone mentioned maybe bad gas? I haven't checked the valves in about 1000 miles, maybe I need to? If not that then I guess I need to take the carb off and have a look inside? Maybe one of the jets is screwed up or something, I'm at a loss.
This scooter (Tao Tao Paladin 150) also uses a fuel pump because the tank is under the floorboard. Maybe that is bad?
« Previous Thread | Next Thread » |
Similar Threads
-
Superbyke RSR: engine starts with choke, but slow without it, and stops with throttle
By Packleader in forum MaintenanceReplies: 2Last Post: 11-24-2015, 11:49 AM -
CFMOTO to pay $725,000 EPA fine for importing non-certified vehicles
By bikerdoc in forum Industry News and Moto TalkReplies: 12Last Post: 05-30-2015, 12:28 PM -
Will 55W HID work fine on my YBR250 with 35W stock?
By modron in forum Modifications (Cosmetic and Performance)Replies: 9Last Post: 01-02-2015, 02:37 AM -
Kick starts ?
By Sprocket in forum Modifications (Cosmetic and Performance)Replies: 5Last Post: 04-02-2010, 02:01 PM -
Need help with a sticking Throttle on my QingQi (QLink) Baccio Runner 150cc
By joerec84 in forum MaintenanceReplies: 1Last Post: 01-07-2010, 07:56 PM