Results 1 to 10 of 10
|
-
#1 Qingqi supermotard Weird behaivour of turn signals
- Join Date
- Jun 2009
- Location
- Honduras
- Posts
- 30
02-12-2010, 07:51 PMAny idea of what can happens?
when I activate the turn signal swicht at idle motor speed, the lights don't flash. Sometime stays ON sometimes OFF an sometimes stays ON but dimed.
As soon as I throtle the engine to 3500RMP they start to flash normaly.
Everything seems normal.
Help Please
andres357magQingqi 200 Supermotard. (Genesis) Mods Until now:Rised Handelbar with stock risers and a lot of washers. Almost 10cm. Pillion handles eliminated and enduro model rack puted in place with turn signals just ziptied to it. Abominable Top Box over rack! Kickstarter removed for comfort (now inside TopBox). PCV pipe bolted to subframe holding my tools. Acerbis supermoto handlebar protector. Turnsignals bolted to the Abominable Top Box base.
-
#2 Re: Qingqi supermotard Weird behaivour of turn signals02-13-2010, 04:41 AM
Good place to start is to check the wiring to your signal control box. Remove and re-seat all connections. I think it's behind the left rear panel.
CC---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
#3 Re: Qingqi supermotard Weird behaivour of turn signals02-13-2010, 07:52 AM
Sounds to me that the flahser unit is kaput, or some elec connectors have oxidised or come loose (as CC's post). I trust you have already used the WD-40.
'09 Huoniao (Firebird) HN125-8 motorcycle [eBay bike-in-a-box]
Aprilia SR50 LC Racing scoot
-
#4 Re: Qingqi supermotard Weird behaivour of turn signals02-13-2010, 10:09 AM
andres357mag, are they LED turn signals?
-
#5 Re: Qingqi supermotard Weird behaivour of turn signals
- Join Date
- Nov 2009
- Posts
- 5
02-14-2010, 05:20 PMHello,
I have the same problem with my turn signals and they dont flash any more(burn constantly) does anyone have the solution yet?
-
#6 Re: Qingqi supermotard Weird behaivour of turn signals'09 Huoniao (Firebird) HN125-8 motorcycle [eBay bike-in-a-box]
Aprilia SR50 LC Racing scoot
-
#7 Re: Qingqi supermotard Weird behaivour of turn signals
- Join Date
- Jun 2009
- Location
- Honduras
- Posts
- 30
02-15-2010, 04:19 PMThey are normal bulbs. Not Leds. To make more complex my doubts:
After put the original post I open the lamps and remove the lights (one seems to be jamed, I could't remove it) clean the contacts a litle (not much dirt or rust) and when I reinstall them turn signals work normaly just to stop working at all at he return of a 1/2 day trip to another city. Being at the road without them is a pain in the seat.
I will check your tips and those from the service manual.
Thanks for the phone numeber davidqc. I will try it as last resort couse is a long distance call.
andres357magQingqi 200 Supermotard. (Genesis) Mods Until now:Rised Handelbar with stock risers and a lot of washers. Almost 10cm. Pillion handles eliminated and enduro model rack puted in place with turn signals just ziptied to it. Abominable Top Box over rack! Kickstarter removed for comfort (now inside TopBox). PCV pipe bolted to subframe holding my tools. Acerbis supermoto handlebar protector. Turnsignals bolted to the Abominable Top Box base.
-
#8 Re: Qingqi supermotard Weird behaivour of turn signals
- Join Date
- Oct 2008
- Posts
- 24
02-26-2010, 08:31 PMTry giving the battery a charge with an Optimate or similar.I had this problem amd doing this cured it.Alternatively, ditch the crappy OEM battery for a good quality replacement.
-
#9 Re: Qingqi supermotard Weird behaivour of turn signals
- Join Date
- Jun 2009
- Location
- Honduras
- Posts
- 30
03-01-2010, 04:48 PMQingqi 200 Supermotard. (Genesis) Mods Until now:Rised Handelbar with stock risers and a lot of washers. Almost 10cm. Pillion handles eliminated and enduro model rack puted in place with turn signals just ziptied to it. Abominable Top Box over rack! Kickstarter removed for comfort (now inside TopBox). PCV pipe bolted to subframe holding my tools. Acerbis supermoto handlebar protector. Turnsignals bolted to the Abominable Top Box base.
-
#10 Re: Qingqi supermotard Weird behaivour of turn signals
- Join Date
- May 2011
- Location
- california,usa
- Posts
- 28
08-24-2012, 07:48 AMhaving a problem on my turn signal assembly coz when i hit it they both blink. According to the wiring diagram, there are two wires to the turn signal. The running light and the blinker. If I have the ignition in the acc. position (no running light) everything works and blinks fine. is there anyone help me bout it? thanks!
« Previous Thread | Next Thread » |
Similar Threads
-
Instrument panel light burned again. Qinqi 200 supermotard
By andres357mag in forum MaintenanceReplies: 1Last Post: 01-15-2010, 11:38 PM -
Qingqi 200 supermotard turn off while handbars turned all to the right
By andres357mag in forum MaintenanceReplies: 6Last Post: 01-15-2010, 07:55 PM -
how to clear the " Carburetor" of QingQi SUperMotard ??? help !i'm New to this.
By GXT200_Costarica in forum MaintenanceReplies: 5Last Post: 07-20-2009, 09:25 AM -
Chinese dual sport/supermotard group buy?
By cat0020 in forum Dirt n' Dual-SportReplies: 10Last Post: 11-09-2008, 10:29 AM -
Stop flashing signals when brakes applied
By Jim in forum MaintenanceReplies: 0Last Post: 04-20-2008, 08:50 PM