Thread: Qingqi QM200GY - Tire Selection
Results 1 to 10 of 14
|
-
#1 Qingqi QM200GY - Tire Selection07-07-2010, 10:33 AMHi everybody!
I think that someone here can help me about tire selection that i need to change. BOth front and rear.
Can somebody suggest me a good city/street tire for Qingqi QM200GY?!
I ride it 90% on tarmac and 10% macadam.
I would also like to put wider tire on back wheel..
Well fck it, if u have time plz suggest me some mud grippy enduro tires that i can fit on stock wheels!
Tnx Filip
-
#2 Re: Qingqi QM200GY - Tire Selection07-07-2010, 09:45 PM
If you have 18" rear and 21" front de facto enduro wheels I can recommend you damn good tires. I wont bother looking other tires if I can get those for low prize.
-
#3 Re: Qingqi QM200GY - Tire Selection07-08-2010, 01:31 PM
no they're not...
front and back are both 17''...
-
#4 Re: Qingqi QM200GY - Tire Selection07-12-2010, 04:53 AM
Hya!
I'm using Heidenau K66 tyres. Bought the QM200GY-B(A) last autumn and the tyres that came with it were abysmal in rainy and cold conditions - I had my tail goin around all the place with 2 degrees celsius and in rain.
Maybe I'm just not very bright, riding a bike near winter in the north of Europe.
But the Heidenaus are lovely, much better grip especially in wetter conditions. They did cost around 200 EUR though together.
K66 link
I have 17'' front and rear rims if I am not mistaken.
The very best of luck finding good tyres!
-
#5 Re: Qingqi QM200GY - Tire Selection
- Join Date
- Jul 2010
- Location
- Central, Ohio
- Posts
- 50
07-12-2010, 05:56 PMI am also looking for tire suggestions for my Qlink XF200. Both front and rear wheels measure 17", I want something that would be good for 50/50ish street/dirt. Am I going to have to upgrade the front wheel to 21" to make this worthwhile? Any suggestions are appreciated.
-
#6 Re: Qingqi QM200GY - Tire Selection07-19-2010, 11:29 AM
@ancronym
Hoya!
What are dimensions of that tires? Same as stock tires or else?
I checked with dealers here in Serbia but no one has Heidenau...
Dealers...
I was thinkng about Metzeler or Bridgestone or Pirelli but don't know witch model...
And i still don't know could i put a wider tire on back wheel, like 140/80/17''
-
#7 Re: Qingqi QM200GY - Tire Selection07-19-2010, 01:27 PM
With a wider back tire than 130 you have to adjust the plastic chain cover I suppose. I have front 110/70-17 and back 130/70-17 and had to adjust it a little.
And you could always order the tires from Germany. As I did, via a local dealer.
Although I did the tire business half a year ago and I don't remember what I learned about other makers tires, maybe there's something good among their selection.
Any other tire ideas from anyone?
Still, I'm happy with my Heidenaus :)
-
#8 Re: Qingqi QM200GY - Tire Selection
-
#9 Re: Qingqi QM200GY - Tire Selection07-19-2010, 01:54 PM
Last edited by ancronym; 07-19-2010 at 03:47 PM.
-
#10 Re: Qingqi QM200GY - Tire Selection07-19-2010, 06:20 PM
I have Armour 3.00-21 4PR front and 4.10-18 59P rear. In the picture you can get some idea how they look.
I did not find them for sale in internet. Some similar looking I found which were at least branded with a different name. Those "Armours" I have are excellent tires. In both dry or wet tarmac I haven't had any slips. The same goes on both wet and dry gravel road. Off-road they have an excellent grip except in soft sand, in where the front tire begins to slide when cornering. In my opinion they are a very good compromise for off-road and tarmac. In tarmac they don't begin to do MX tire sounds and vibrations and have a great grip while working very well off-road too.
I have used bad cheap tires, "Armours" I have now are totally different.
« Previous Thread | Next Thread » |
Similar Threads
-
QingQi (Qlink) QM200GY About the clutch
By ChinaV in forum MaintenanceReplies: 19Last Post: 11-17-2012, 01:30 PM -
Qingqi QM200GY-BA Super Motard
By supermoto in forum Dirt n' Dual-SportReplies: 42Last Post: 12-18-2010, 11:00 PM -
My Qingqi QM200GY-BA Super Motard
By DeSaint in forum Dirt n' Dual-SportReplies: 32Last Post: 09-02-2009, 10:41 PM -
QingQi qm200gy motor photos
By DanKearney in forum Parts DeskReplies: 14Last Post: 12-08-2008, 04:05 PM -
My Qingqi QM200GY(I), an excellent fellow!
By tonykong in forum Welcome to MCM!Replies: 11Last Post: 05-13-2008, 04:45 PM