Thread: my 2nd 16 inch bobber
Results 1 to 4 of 4
|
-
#1 my 2nd 16 inch bobber08-25-2010, 01:04 PM
i think i already introduced my 2 solo changs in another thread:
since i modified my black bobber with the previous 19inch rims (see pic)Last edited by Geronimo; 03-27-2011 at 12:06 AM.
http://www.4444-Chang-Jiang-Design.com
-
#2 Re: my 2nd 16 inch bobber
- Join Date
- Mar 2009
- Location
- Guang frigging Zhou
- Posts
- 385
08-26-2010, 05:04 AMVery pretty bikes! Can't help but wonder how they handle. Specifically, how is the braking? My Chinese motorcycles are daily commuters but these look like they'd be good for a Sunday jaunt.
-
#3 Re: my 2nd 16 inch bobber09-13-2010, 11:05 AM
brakes of the red one work pretty fine - the black one is hard to stop ...
even with the additional weight of a sidecar i was satisfied with the brakes - so no problem at all!
handling is alos fine for me - circling i a bit limited due to the footboards but with the usual footpegs the solo-changs ride finehttp://www.4444-Chang-Jiang-Design.com
-
#4 Re: my 2nd 16 inch bobber09-13-2010, 11:10 AM
So far that's the latest status of my red ride ...
it is still not finished - for example the seat sits too high for me - i need to lower the whole seat-setup at least 1 or 2 inches
fender is also too high and the scallops on the tank do not look right ...
i already broight a smaller tank from europe and will modify to fit the chang - when the new smaller tank gets the paintjob done i stay at the sprayboot to take care nothings going wrong ...Last edited by Geronimo; 03-27-2011 at 12:05 AM.
http://www.4444-Chang-Jiang-Design.com
« Previous Thread | Next Thread » |
Similar Threads
-
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Pictures and videos regal raptor bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 11:01 AM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
16 inch
By Geronimo in forum SidecarsReplies: 27Last Post: 03-28-2011, 04:13 PM