Thread: how does this little device work
Results 1 to 5 of 5
|
-
#1 how does this little device work
- Join Date
- Jun 2010
- Posts
- 26
11-01-2010, 11:45 AMdue to a mess up with my insurance im unable to ride untill the problem is sorted so im deciding to change my piston, clutch plates and springs to aftermarket ones, i know exactly how to change the piston etc and i know hw to do time and so on but im not to sure how the cam tensioner device works properly so im begging for some info on how to tighten loosen and remove the device, thanks very much
-
#2 Re: how does this little device work
-
#3 Re: how does this little device work11-01-2010, 02:21 PM
Here is very well, explained step by step, unfortunately in Portuguese of Brazil, use Google translator if you do not understand I help
http://www.motonline.com.br/forum/fo...D=6691&P%20N=6Sundown 200cc STX motard
-
#4 Re: how does this little device work
- Join Date
- Jun 2010
- Posts
- 26
11-01-2010, 02:36 PMexcellent, i understook it perfectly with google, by anychance could you find me a similar tutoral on how to change the piston etc, always handy to have a guide
-
#5 Re: how does this little device work11-02-2010, 06:23 AM
I'm not sure if your engine and carb are these
Unfortunately it's a service manual, in Portuguese of Brazil but you can translate using Ctrl C and Ctrl V on google translator.
http://www.4shared.com/document/v1Uw...uzuki_Yes.htmlSundown 200cc STX motard
« Previous Thread | Next Thread » |
Similar Threads
-
Work for a Famous Motorcycle Company! Based in Shanghai
By 1victoria in forum AsiaReplies: 23Last Post: 08-11-2010, 02:19 PM -
Work for a Famous Motorcycle Company! Based in Shanghai
By 1victoria in forum Industry News and Moto TalkReplies: 0Last Post: 07-27-2010, 06:21 AM -
cant work it out
By skikman in forum MaintenanceReplies: 2Last Post: 07-07-2010, 06:41 PM -
will work,wo`nt work (cdi problem)
By markm111273 in forum MaintenanceReplies: 1Last Post: 02-11-2010, 03:50 PM -
all electrics work on my sj125gy-3a but no spark?
By maddog23 in forum MaintenanceReplies: 2Last Post: 03-31-2009, 08:42 AM