hello from uk

[sheepus7]

just thought id say hello, i have a suzuki dr125sm (yes i know its not chinese), but im after an exhaust for it and chinese bikes like the pulse adreniline and others are based on it so could anyone give me a link to a cheap echaust that will fit
many thanks
sean

[jape]

What is the pipe diameter and the muffler length you need? The one below may NOT be your one but is a starting point for you if you want really cheap. Check your pipe diameter and so on. I have been looking for my own bike, a 200cc so have these links bookmarked.

The store below answers email questions very quickly and if you write careful english they understand it very well. You can also make offers a few quid below and still win.
I have shopped with them, no worries. You should expect a delay of a week maybe, Chinese New year!
You usually need to go to the 'alpha' store or you will find exactly the same thing elsewhere at marked up prices.
http://cgi.ebay.com/NEW-SCOOTER-MUFF...item2eb2d9e1b8
however this time you might be lucky (if it fits your bike), so check that first
http://www.virtualvillage.co.uk/alum...04616-177.html

You will see the same and similar on USA Ebay sites and some coloured aluminium ones, well priced but be VERY careful of shipping costs.

http://www.china-parts.co.uk/acatalo...st_System.html might be a good bet if you are cautious because you can ring them, look down this page and there are a couple of shineray 125cc
and a search finds even more
http://www.china-parts.co.uk/cgi-bin...ION&PR=-1&TB=A

you can do the rest of the work yourself!

[sheepus7]

none of the above look like they will fit, i will measure the pipe diamiter later, im not too fused about the lenth of the end can, thanks for your help anyone else know any that will fit

[barnone]

This can is available on Ebay UK.
http://cgi.ebay.co.uk/YOSHIMURA-Oval...item43a4851276
I didn't get any gain other than noise,

[sheepus7]

thanks and noise is the only gain i want , i want a nice deep sound

[jape]

Well before you spend money, try drilling a few holes in the end plate then.

[sheepus7]

Well before you spend money, try drilling a few holes in the end plate then.

i cant as the end is welded on

[sheepus7]

Well before you spend money, try drilling a few holes in the end plate then.

i cant do this as the tip of the exhaust is welded on :(
this is the dr125sm downpipe
http://cgi.ebay.co.uk/suzuki-dr125sm...item43a4759904
and this is the pulse adrenaline
http://cgi.ebay.co.uk/Exhaust-Down-P...item2560f710af
as you can see they are slightley different

[sheepus7]

This can is available on Ebay UK.
http://cgi.ebay.co.uk/YOSHIMURA-Oval...item43a4851276
I didn't get any gain other than noise,

i use this endcan because my pipe is different to this the endcan has a few inches of pipe welded onto iten it joins the pipe which goes into the engine and the pipe diamiter is 19mm

[sheepus7]

just measured the pipe its 19mm
and i cant get that yoshi can becase my down pipe is different to that
dr125sm downpipe
http://cgi.ebay.co.uk/suzuki-dr125sm...item43a4759904
sinnis apache downpipe
http://cgi.ebay.co.uk/Exhaust-Down-P...item2560fec380
as you can see the dr125sm downpipe is shorter because there is a few inches welded on to the endcan then it joins to the downpipe