Results 21 to 30 of 49
|
-
#21 Re: Shanghai Inner Ring Number Plate Price & Registration Process02-13-2011, 02:46 PM
Motorcycles with engine size larger than 50cc require yellow plates, including yellow A, B and C. Only bikes of less than or equal to 50cc are eligible for those plates mentioned here costing around 17000, which are blue A with similar access coverage of city roads as yellow A and B. As far as your situation goes, since Minhang, Songjiang and Pudong all three allow yellow C plate, you are in luck for the cheaper yellow c option, which costs around 5000. (I am pretty sure about yellow C and Pudong, of which I am a resident.) I believe you go to where your residency is located for your plate, not where your visa was issued or which company your visa was sponsored by.
Hope this helps. Cheers!Last edited by milton; 02-13-2011 at 11:14 PM.
-
#22 Re: Shanghai Inner Ring Number Plate Price & Registration Process
- Join Date
- Mar 2009
- Location
- Guang frigging Zhou
- Posts
- 385
02-13-2011, 03:34 PMHoly cats! I really had no idea about this. Very much appreciated information that is going to change my plans considerably in the near future. I'll have to check this out again during the week with the local authorities. I can't help but wonder why more people aren't doing this rather than risking fines and putting up with the inconvenience at local petrol stations.
-
#23 Re: Shanghai Inner Ring Number Plate Price & Registration Process02-13-2011, 11:25 PM
A reminder: Yellow c can only enter those districts that allow it, which pretty much rules out almost all districts inside the inner ring. Yellow A and B can do more, but with many off-limit roads as well. There is an excellent Google map that marks those forbidden roads: http://ditu.google.com/maps/ms?ie=UT...6&ll=31.237756
Last edited by milton; 02-14-2011 at 04:52 AM.
-
#24 Re: Shanghai Inner Ring Number Plate Price & Registration Process
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
02-14-2011, 03:49 AMExcellent map, Milton! Very useful.
As for our new friend dewsnap in Minhang, there should be no problem using the yellow "no access inner ring" plate in his part of town, though this will render all of downtown Shanghai as forbidden fruit.
As we've discussed many times before in MCM, the maximum fine for riding a 沪C plate inside the ring is 200 RMB, or about US$30, and as long as your plate is legal it's unlikely the bike will be confiscated. You'll just be fined (if the officer is in that kinda mood) and sent on your way. OK, do the math -- it would take a hell of a lot of 200 RMB fines to approach 45000 RMB (225 times, to be exact, or once a day for almost 8 months). If I lived in Pudong or Minhang and had no need to ride inside the ring, that's surely what I'd do. I have the Inner Ring plate because that's where I live (and, as discussed ad nauseum, the 沪A plate hopefully appreciates in value...). But if I lived and worked outside the ring, I could think of few things more unsatisfying that motorcycling INTO Shanghai downtown. The awesome Shanghai metro will take you almost anywhere for under US$1 a trip.
cheersjkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#25 Re: Shanghai Inner Ring Number Plate Price & Registration Process02-14-2011, 06:46 AM
What hasnt been mentioned on this forum yet is that as well as a 200 kuai fine, you also get 3 points taken off your license.
Your license has 12 points, which if lost come back automatically after a year, apparently. So you can afford to get caught 3 times, after that stop for a year or risk losing your license...
-
#26 Re: Shanghai Inner Ring Number Plate Price & Registration Process
- Join Date
- Mar 2009
- Location
- Guang frigging Zhou
- Posts
- 385
02-14-2011, 07:46 AMThat makes it a little less likely to be abused. However, I still see lots of C plates when I'm downtown. Not to mention no plates whatsoever or (as unfortunately in my case) plates from another province entirely. 5000 is within my means. I'm very much surprised that more people aren't lining up to get these with the new laws in place, rather than lining up to get jerry cans.....
-
#27 Re: Shanghai Inner Ring Number Plate Price & Registration Process02-16-2011, 12:04 PM
Yep, watercooled and EFI. Still think it's pretty pricey tho!
I have tracked down three other supposed Raptor dealers so I am going to have a shop around and bargain a bit:
上海市嘉定区丰庄路317号
上海市长宁区长宁路1357号
and
上海市宝山区罗店镇罗升路212号
Anyone ever been to any of these addresses and can comment on whether they are legit Raptor dealers or some guy who happened to come across a Raptor for resale?
-
#28 Re: Shanghai Inner Ring Number Plate Price & Registration Process
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
02-16-2011, 03:45 PMOnly the second one is anywhere near central Shanghai. I'd start there first. It's in the Zhongshan Park area, roughly. Jiading and Baoshan are a hike.
It's a good strategy. Pubei Lu can compete on price with all the platinum priced hardware from BMW and Benelli next door. On Changning Lu (or in Jiading or Baoshan) the RR will be the priciest thing on the block, so you can start bitching about the price and perhaps be taken seriously. Say you live in the neighborhood, and don't let on that you even know about the Pubei shop.
Happy hunting!
cheersjkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#29 Re: Shanghai Inner Ring Number Plate Price & Registration Process02-17-2011, 05:19 PM
Thanks so much for the map. That's gonna be really useful.
I'm delighted to see my University is just on the outskirts of the no go zone.
I didn't know it was so bloody close tho. Phew!
I wonder if anyone could clarify the boundaries a little more for me.
Where does the boundary start just south of Xujiahui? It looks like the intersection where IKEA is located just off Humin Highway? I think i need to start memorizing the boundaries.
Yeah, i'm also still seeing a lot of bikes around Shanghai with no plates.Last edited by dewsnap; 02-18-2011 at 02:07 PM.
-
#30 Re: Shanghai Inner Ring Number Plate Price & Registration Process02-18-2011, 04:48 AM
Pubei Lu shop is owned by the same guy who owns the BMW and Benelli shop as well as the car service center.... Basically he owns the block.
« Previous Thread | Next Thread » |
Similar Threads
-
Insurance and registration in China
By Brian in forum Test TrackReplies: 3Last Post: 03-08-2012, 10:58 AM -
loss of license and registration,, opps
By lightend in forum Off Topic DiscussionsReplies: 0Last Post: 09-13-2010, 03:20 PM -
BEIJING and the plate numbers
By sylvainR1150R in forum Welcome to MCM!Replies: 13Last Post: 07-15-2010, 06:06 AM -
The Shanghai F1 track day (Sun & Mon ,11-12 / 7 / 2010 )
By Lisa in forum Racing and Track DaysReplies: 0Last Post: 07-05-2010, 06:28 AM -
How to tell if it's an O-Ring Chain?
By txm123 in forum Parts DeskReplies: 3Last Post: 04-05-2009, 10:54 PM
Tags for this Thread |
NashGorizont
10-19-2024, 04:20 PM in Off Topic Discussions