mikilon m96

**DJCW** · 09-06-2009, 01:04 PM

I'm looking for the same thing. So far I'm really happy with the bike but will need to start service soon and need info and a source of spares. Did you find anythinge useful?

**da beard** · 10-23-2009, 08:56 AM

hey there guys and girls ,

i have just brought myself a Mikilon M96 125-SB SuperMoto and i have had a fare few problems to say the least but the most major problem i am having is setting the air/fuel mixture screw correctly .

I was wondering if anyone happens to know the default setting for this ,eg how many turns out to get it sweet ?

cheers

**DJCW** · 10-24-2009, 09:53 AM

Hi,

I checked its factory setting at 2.5 turns when I got my bike, but cannot guarantee that this is the best setting. Seems OK and bike is pulling alright.

might need to do some trial and see how it goes.

**CrazyCarl** · 10-27-2009, 02:51 PM

Hey guys. I really don't think the "factory" setting on the carbs is anything more than consistently putting the screw half way through it's turning range fora ll produced carbs. Carbs are not usually produced by the manufacturers and there's a great question as to whether or not the manufs do any ajustment to them before shipping.

Best thing is to tune it for your bike and riding environment.

CC

**erkfreak** · 04-28-2010, 10:37 PM

i have recently bought a mikilon m96 and am having some problems when ticking over or reving high the front end i.e the forks and front wheel vibrate like mad and i am having problems with the ignition sometimes it works sometimes it doesnt i have to knock it off and on all the time please help as its getting dangerous ??????

**arsenic** · 02-19-2011, 08:35 PM

Hi guys, I'm french, and I've bought a mikilon m96 ....
(There is not much of these bike in france ...)

You seem to know how to tune this carb. Can you explains a little more about this ???

Actually the engine had a lack of power : I can't engage the 3rd speed, nor accelerate with the second (when accelerate, the engine fall down ....) => I think it's a carb problem ? Isn't it ?

Thx

**webber1926** · 08-26-2014, 05:54 PM

hi guys, just got one of these mikilon M96-125 SB's any idea where i can get spare parts from? cant find any anywhere. thanks

Thread: mikilon m96

Thread Tools

Display

Bookmarks

NashGorizont