Results 111 to 120 of 6336
|
-
#111 Re: Finally Registered My Dong Fang DF250RTB Bobber In Florida03-03-2011, 04:18 PM
-
#112 Re: Finally Registered My Dong Fang DF250RTB Bobber In Florida03-03-2011, 05:23 PM
Another thing that had me worried was the way the crankcase breather hose is connected to the dummy oil tank instead of to an air box or air filter.
I just installed a crankcase breather filter to remove that hose to the dummy tank that contains the electrics. Didn't want a bunch of oil or fumes getting in there.
Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#113 Re: Anyone Know Of Dong Fang DF250RTB Bobber?
-
#114 Re: Anyone Know Of Dong Fang DF250RTB Bobber?
- Join Date
- Feb 2011
- Location
- NY
- Posts
- 124
03-03-2011, 06:07 PMI got ya, even still if that is creating a negative pressure (sucking in) you should connect that to the crank case breather. Once in a blue moon it might suck some oil but thats perfectly fine. It will create a negative pressure inside the crankcase removing all the air in there to reduce friction and let the oil flow much better. I have done this on every one of my race bikes in the past, and a few for street use, the only ones I didn't do the pair sucker mod on were my stunt bikes due to getting tipped over all the time and draining oil into the hose. It is a bit worse for the environment though because it will burn off oil if it gets sucked up. I am going to put an order in for one of these today and if I have no issues getting it regged I'll wind up getting the rest I need =)
I'll keep you all posted.
-
#115 Re: Anyone Know Of Dong Fang DF250RTB Bobber?03-03-2011, 08:20 PM
The port that the plate is covering is in the exhaust port so it would create a positive pressure (exhaust gas). I removed the SAI (what we use to call a smog pump) and it pumps outside air into that port.
Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#116 Re: Anyone Know Of Dong Fang DF250RTB Bobber?03-03-2011, 08:29 PM
Got my sheep skin from New Zealand
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
so I put it on and went for a ride. Very nice and comfortable.
Watching the wind surfers.
Met a new friend and her dog
Felt guilty so went out to our cottage and supervised my wife's painting.Last edited by barnone; 03-04-2011 at 01:13 AM.
Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#117 Re: Anyone Know Of Dong Fang DF250RTB Bobber?03-03-2011, 09:07 PM
Barnone, there is a tribble on your seat. Yea the Bike is a magnet, just sittin in my driveway i had a few women stop and ask about it.
oh and BTW i got an email and a phone call that my filled out MCO will be here on Monday.
-
#118 Re: Anyone Know Of Dong Fang DF250RTB Bobber?
- Join Date
- Feb 2011
- Location
- NY
- Posts
- 124
03-03-2011, 09:20 PMLookin good =)
Well I just ordered mine as well from countyimports.com =)
It came out to $2,249.49 - that was with the $50 discount, it seems they bumped the price up $100 from 2 days ago but I'm not gonna cry over it :P
I am going to tell them to throw in the helmet for $0.01 - I didn't see that deal because I called it in over the phone to place the order, but I'm sure they will toss it in.
Now I'm not going to be able to sleep till I get this bike in my parking spot =)
-
#119 Re: Anyone Know Of Dong Fang DF250RTB Bobber?03-03-2011, 09:25 PM
Gordo,
Good news about your MSO. Maybe I just got a new person at extreme. I mean it's not rocket science to send out a correct MSO and bill of sale.
Yep, it gets a lot of attention. Anybody on this site have a bike business in the USA? I could send a lot of business your way.
I keep forgetting to mention that I checked the valves on my bike at 200 miles and they were too tight. Easy enough to adjust.Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#120 Re: Anyone Know Of Dong Fang DF250RTB Bobber?
- Join Date
- Feb 2011
- Location
- NY
- Posts
- 124
03-03-2011, 09:35 PMare there any docs on adjusting the valves? I read somewhere the first thing you do out of the create with these chinese bike was to check/adjust the valves, But I cant recall where I saw it at.
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |