An Exhaust That fits this model?

[Kennon]

only place iv been told to get one from is off the dealer but over here in the UK its quite a costly option to get dont know what the tax on things is like over in hondorus best off asking the dealer

[Lucien]

Zansax, just remember you´ll probably need to replace your stock air cleaner for something like K&N, remember you have to balance, more air out, more air in, after that you´ll probably run lean on you air/gas mixture. Solution enrich it via adjusting the C-clip on your carb, and also changing the main jet to a bigger size, depending on altitude.
Have fun!!! Cheers!!

[zansax]

Zansax, just remember you´ll probably need to replace your stock air cleaner for something like K&N, remember you have to balance, more air out, more air in, after that you´ll probably run lean on you air/gas mixture. Solution enrich it via adjusting the C-clip on your carb, and also changing the main jet to a bigger size, depending on altitude.
Have fun!!! Cheers!!

now you lost me, i really don't understand everything of jet c-clip
but i know where is the air filter XD

[pulsepat]

http://cgi.ebay.co.uk/YOSHIMURA-Oval...item43a4851276

very very loud

Hi I have just bought this exhaust and I can see in this pic there is a mod so u can use the supplied springs. Please tell me how you have done it. I cant make it out. I know about angle grinding the brackets off and cutting slices down the connector pipe to use a jubilee type connection but still id like to keep my options open before I take a grinder to my new can lol. Cheers

[Lucien]

no so much of a estupid question, it's more like i may have ask the wrong quiestion

anyway

what i whas trying to say was an: another exhaust like a fmf or something like that and i was looking for opinions

or to make it simple i want another exhaust for this bike one the make some noise :)

because some one tell me i should drill some hole on the end cap but i want something that looks good

Dude this can is made in Brazil with highest quality, it may be easier to get in Honduras:
http://produto.mercadolivre.com.br/M...ss-_JM:riding:

[laurpat]

I put this can on but I also made a new stainless link pipe - Really helps with adding a nice sound to the bike and helps airflow. Tried to change the airbox but the port from the airbox into the engine is small and would need to be bored out to make a difference

[Lucien]

Nice Yoshi can Laurpat, good work on header pipe,was it expensive?

[laurpat]

Nice Yoshi can Laurpat, good work on header pipe,was it expensive?

Not expensive - I made it myself - maybe €25 at most... Looks the part when polieshed up

[zansax]

thanks to all of you for the suggestions i really wanta a FMF exhaust but it cost 500$ with the delivery here in Honduras i really want that,
a few days ago i saw a exhaust named Lazer(no it's not laser this is another brand checkout their web page http://www.lazerproductos.com/index2.htm) and it sound really good and it looks nice so i'm gona use one of this for my bike thanks here is a picture of the mufflers

IMG_4801.jpg

IMG_4810.jpg
i think i'll go with the one that has a golden end cap