Will a GN 250 fit a Pulse Adrenaline 125cc

[laurpat]

Guys and Gals,

I'm looking to find out what 250cc engine will fit as a replacement for the 125cc engine.

Am I right in saying that this engine is a clone of the Suzuki GS125 or is it a clone of the Honda CG125. I don't really mind if I have to make some modifications around the Link pipe / End can. What would be the story with the engine mounts / ECU / Loom?

Thanks for taking the time to read, any help would be greatly appreciated...

P

[Kennon]

hmm possible but you have to do some measurements of your own engine and get some from the GN 250 would have to modify or completely redo the mounts/engine brackets for example iit will need the appropriate amount of vibration reduction in the mounts/brackets being a bigger thumping engine, the ECu will have to be suited for the GN 250 some of the loom like ignition and lights will be fine to incorperate into a new one just make sure the connections are clean and wont be affected by the weather

[MJH]

You would need the engine and or the diagrams of the engines and the wiring diagrams would be helpful.

[humanbeing]

the chinese version http://motorcycle.sh.cn/viewthread.p...d=87720&page=1 frame: Suzuki GS125 that assembled by Hyosung in South Korea/ Donor machine : '92 GN250

[td_ref]

They are not identical. Pulse Adrenaline engine is similar to GS125, GN250 engine is bigger all around.

wr0KVg6Uq4433.jpg

I assume engine at your bike is also use as frame stress part. I would reconsider modify frame for this reason alone. Also there may be very little space for mounting carb.