Results 1 to 10 of 101
|
-
#1 My new Chinese Enduro Bike "M-Bike JL200GY-2C" and modify08-25-2011, 08:18 AM
Index (I will update regularly in order to find thing easier)
Page 1
- Going to get a new bike
- Plan for the cosmatic and performance
- Got new F+R rim and alu swing arm
- Honda XLR200R Service Manual for DL
- VI chart for lub oil and to use in the USD fork
- Plan to get new Tires, IRC IR-Z003
Page 2
- Gen Talk on the tires
- Discuss about engine 163 FML and the spec similar to 1996 XLR200R and TA200
- This bike as same engine with Lifan JL200GY-5A
Page 3
- Full review and spec of Honda XLR200R
- Lifan engines used in various vehicles in Thailand
- Home made Motard, using Lifan Engine and local part
- Historical of Honda RC100 - RC116
- Honda Dream Replica "CB50R"
Page 4
- Plan for Muffler and exhaust modification
- Skyteam Ace Dream 125cc Retro Motorbike, in Thailand call Tiger 150TT but never import
- VIN and where to find out
- Pick up the bike
- First pic after the show room, plan for decor stuff
- Speed calculation graph
Page 5
- Spec from Booket
- New Seat Cover
- Another set of Hand Guard
- Change bolts with Stainless Steel
- Engine oil change with Valvoline Diesel 100% Syn 5W-40 API SL
- Gold CNC front brake cover
- Anti slip brake and clutch lever
- New sticker with Honda Racing Team
- Adjust Air Screw from 2 turns to 1 turn
- Front brake got better respond
Page 6
Page 7
-------------------------------------------------------------------------------
Hi,
Just post some pic of this bike in "Your Chinese Dual sport picture thread"
So I thought it is better to make a new topic and I can do a lot of posting on her.
I ordered this bike "M-Bike JL200GY-2C" on 10 Aug 2011 cost
THB 46,000 ( 1 usd = 29.8...approx USD 1,543.-)
this is a good deal compare to KLX125 cost twice and KLX250 would cost 3 times high.
I paid deposit of THB 2,000 and the bike arrive the dealer on 12 Aug 2011
I went to the dealer and took her pictures as below
Last edited by Kot; 09-11-2011 at 09:59 AM.
Current bike....2011 M-Bike JL200GY-2C
New Hobby: Photograph with Sony A500 + Minolta 50/1.4 - 28/2.8 - Zoom 80-200 APO G NEX5n + Most vintage German manual lenses i.e. Carl Zeiss Jena, Schneider Kreutznach, Enna Munchen, ISCO Gottingen, Steinheil, Voigtlander, Paxatte Staeble, Elmar & Elmarit, Meyer Gorlitz, Roeschlein Kreuznach, Rollei, Edixa, Pentacon, Schacht Ulm, Exakta, and enjoy life
-
#2 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-25-2011, 08:21 AMCurrent bike....2011 M-Bike JL200GY-2C
New Hobby: Photograph with Sony A500 + Minolta 50/1.4 - 28/2.8 - Zoom 80-200 APO G NEX5n + Most vintage German manual lenses i.e. Carl Zeiss Jena, Schneider Kreutznach, Enna Munchen, ISCO Gottingen, Steinheil, Voigtlander, Paxatte Staeble, Elmar & Elmarit, Meyer Gorlitz, Roeschlein Kreuznach, Rollei, Edixa, Pentacon, Schacht Ulm, Exakta, and enjoy life
-
#3 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-25-2011, 08:28 AM
I was searching around for more info
I got the service manual from 4shared of the Honda XL200 which basically the engine has the same copy.
to DL Honda XL200 click below link
http://www.4shared.com/file/gxamcRPV...ice_Manual.htmCurrent bike....2011 M-Bike JL200GY-2C
New Hobby: Photograph with Sony A500 + Minolta 50/1.4 - 28/2.8 - Zoom 80-200 APO G NEX5n + Most vintage German manual lenses i.e. Carl Zeiss Jena, Schneider Kreutznach, Enna Munchen, ISCO Gottingen, Steinheil, Voigtlander, Paxatte Staeble, Elmar & Elmarit, Meyer Gorlitz, Roeschlein Kreuznach, Rollei, Edixa, Pentacon, Schacht Ulm, Exakta, and enjoy life
-
#4 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-25-2011, 08:38 AM
I want to have a new alu swing arm, new 17" rim front+rear.
I look around at local area and was thinking to get the rear set from Honda Bros400, or VFR400
who had Pro-Arm in the rear as below pic.
Pro Arm is very famous in Ph and Indonesia, Malaysia, Thailand
Most small underbones bike will transfer pro-arm from Honda NSR150SP
This is a sample on Honda Sonic 125cc
Last edited by Kot; 08-25-2011 at 11:18 AM.
Current bike....2011 M-Bike JL200GY-2C
New Hobby: Photograph with Sony A500 + Minolta 50/1.4 - 28/2.8 - Zoom 80-200 APO G NEX5n + Most vintage German manual lenses i.e. Carl Zeiss Jena, Schneider Kreutznach, Enna Munchen, ISCO Gottingen, Steinheil, Voigtlander, Paxatte Staeble, Elmar & Elmarit, Meyer Gorlitz, Roeschlein Kreuznach, Rollei, Edixa, Pentacon, Schacht Ulm, Exakta, and enjoy life
-
#5 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-25-2011, 09:12 AM
Just today I look around and found this set of rim from Honda CBR250
Front Rim 2.5*17
Rear Rim 3.0*17
Plus aluminum swing arm, and used rear shock from NSR250
So I just bought this set and will try to see how It will fit into her.....
I have to use a lot of resurces, skill of machanic, and leathal shop
Current bike....2011 M-Bike JL200GY-2C
New Hobby: Photograph with Sony A500 + Minolta 50/1.4 - 28/2.8 - Zoom 80-200 APO G NEX5n + Most vintage German manual lenses i.e. Carl Zeiss Jena, Schneider Kreutznach, Enna Munchen, ISCO Gottingen, Steinheil, Voigtlander, Paxatte Staeble, Elmar & Elmarit, Meyer Gorlitz, Roeschlein Kreuznach, Rollei, Edixa, Pentacon, Schacht Ulm, Exakta, and enjoy life
-
#6 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-25-2011, 10:45 AM
nice list of mods mate bet it'll look ace when its done
-
#7 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-25-2011, 11:31 AM
Tks a lot, I also have to rebuild Honda HX135 and Suzuki TS125A at the same time.
This bike may take longer to finish all the plan. On the "VE" that I have to do some mod on the IM, EM, and rear silencer.
I did not post in full as too many small things to do.
In my area there is a Honda Phantom TA200 shared the same engine spec
which build better quality engine. I can use a lot of parts from this bike.
Lifan 163FML engine, brand new cost THB 11,000 (Approx USD 369.-) which I have
2 alternate ways of getting the power back in case I blow up her the engine.Current bike....2011 M-Bike JL200GY-2C
New Hobby: Photograph with Sony A500 + Minolta 50/1.4 - 28/2.8 - Zoom 80-200 APO G NEX5n + Most vintage German manual lenses i.e. Carl Zeiss Jena, Schneider Kreutznach, Enna Munchen, ISCO Gottingen, Steinheil, Voigtlander, Paxatte Staeble, Elmar & Elmarit, Meyer Gorlitz, Roeschlein Kreuznach, Rollei, Edixa, Pentacon, Schacht Ulm, Exakta, and enjoy life
-
#8 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-25-2011, 12:46 PM
ahh got a plan just in case, no plans for adjustible USD forks?
you should have a look at my bike
http://www.mychinamoto.com/forums/sh...hon-PRP-125-SM
-
#9 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-25-2011, 03:19 PM
Great and so cool 125cc bike you have.
This is not just a plan, started buying stuff already.
My concept of any mod will have to fit into....Safety and Value
The rear alu swing arm will have to fit with safety and value.
The performance of unsprung weight is a plus !!!!
Front adjust USD fort is not in my plan. I can mod this fork
to get rebound and spring preload to meet my requirement.
Just not much room to do the damp!!!! Long to talk just shorten this.
End result I only spend a few washers and few ltr of oil for fork.
I plan to test and use between ISO VG 10-32-46-68 to see which
number will fit best to my require. As the bike will mostly ride
in city of Bangkok where the traffic is badly jam. Riding sport
bike in city is less fun when compare to this dual purpose bike.
Cheers
Kot
Current bike....2011 M-Bike JL200GY-2C
New Hobby: Photograph with Sony A500 + Minolta 50/1.4 - 28/2.8 - Zoom 80-200 APO G NEX5n + Most vintage German manual lenses i.e. Carl Zeiss Jena, Schneider Kreutznach, Enna Munchen, ISCO Gottingen, Steinheil, Voigtlander, Paxatte Staeble, Elmar & Elmarit, Meyer Gorlitz, Roeschlein Kreuznach, Rollei, Edixa, Pentacon, Schacht Ulm, Exakta, and enjoy life
-
#10 Re: My new Chinese Enduro Bike "M-Bike JL200GY-2C"08-26-2011, 09:27 AM
Urgent list after pick up the bike:-
1- Change engine oil
2- Change F+R wheel, rear swing arm
3- Change Tyres, plan for IRC IZ-R003 size F 100/80/17 and R 130/80/17
4- Mod F+R brake by using from Nissin Set I got in earlier post
5- Frame sliders to protect the engine side cover in case of falling
These pic for above
IZ-R is a soft compond, this pic in the <60km in track with Ninja250
These frame slider, upper with light for driving safety and beauty,
below made of alu alloy this one protect the bike when fall.
That's all for now. My next update after I pick the bike sometime in week one of Sep 2011.
Tks for reading
Cheers
KotCurrent bike....2011 M-Bike JL200GY-2C
New Hobby: Photograph with Sony A500 + Minolta 50/1.4 - 28/2.8 - Zoom 80-200 APO G NEX5n + Most vintage German manual lenses i.e. Carl Zeiss Jena, Schneider Kreutznach, Enna Munchen, ISCO Gottingen, Steinheil, Voigtlander, Paxatte Staeble, Elmar & Elmarit, Meyer Gorlitz, Roeschlein Kreuznach, Rollei, Edixa, Pentacon, Schacht Ulm, Exakta, and enjoy life
« Previous Thread | Next Thread » |
Similar Threads
-
QingQi "Rock" X-Bike - Feedback wanted from factory!
By CrazyCarl in forum Industry News and Moto TalkReplies: 78Last Post: 10-13-2011, 05:25 PM -
Did you know the literal translation for Animal in Chinese is "Thing that moves"
By Serpentza in forum Off Topic DiscussionsReplies: 1Last Post: 01-28-2011, 07:27 PM -
"Brother Gymnast" - A rider in Wenzhou who flipped 360 degrees
By MotoKai in forum Off Topic DiscussionsReplies: 5Last Post: 10-18-2010, 09:00 PM -
How do you say "motard/supermoto/supermotard" in Chinese?
By Dan H. in forum Dirt n' Dual-SportReplies: 5Last Post: 06-02-2009, 08:25 AM
Tags for this Thread |