CCW tha Heist

**Gardo** · 10-04-2011, 04:56 PM

Scootdog, Scotty from CCW got back to me and will check it out and let us know

**scootdog11** · 10-04-2011, 05:00 PM

Originally Posted by Gardo

Scootdog, Scotty from CCW got back to me and will check it out and let us know

Thanks man - sounds good.

**chain** · 10-05-2011, 12:40 AM

Got a qoute from Weaver for the bike I want. Going to be a long winters wait. Im going to try to meet up with Kevin and check out the Shitwizard. gardo that video is pretty cool..nice bike.

**Gardo** · 10-05-2011, 02:17 AM

thans man I know the vid itself if crap but the content is good. She sounds much better in person.

**SteelToe** · 10-06-2011, 11:03 PM

Gardo, what kickstart lever is that in the latest video you posted? The one I bought doesn't clear. I have the same exact dent in my pipe as the ShitWizard bike.

**Gardo** · 10-07-2011, 01:22 AM

Originally Posted by SteelToe

Gardo, what kickstart lever is that in the latest video you posted? The one I bought doesn't clear. I have the same exact dent in my pipe as the ShitWizard bike.

Steeltoe do you have a G$D Pipe? I have a Custom Weaver pipe the dimensions i think are a bit different my pipe sits a bit power and I noticed it is scraping the exhaust wrap.

The lever I also got from Weaver

**JK3** · 10-07-2011, 02:07 AM

Ok guys, finally got a little video uploaded of my exhaust. The pipe is the stock header cut where the it starts to flare out. Then a section of 2-3/4" pipe was welded on to fit an old baffle from my HD in there, not really a baffle but it's basically a 8" long tube that narrows a bit in the middle and has a "lollipop" in there for some back pressure. http://youtu.be/WwrRiIZ5yVA

**Gardo** · 10-07-2011, 02:39 AM

Originally Posted by JK3

Ok guys, finally got a little video uploaded of my exhaust. The pipe is the stock header cut where the it starts to flare out. Then a section of 2-3/4" pipe was welded on to fit an old baffle from my HD in there, not really a baffle but it's basically a 8" long tube that narrows a bit in the middle and has a "lollipop" in there for some back pressure. http://youtu.be/WwrRiIZ5yVA

Dude the Bike looks and sounds great

**SteelToe** · 10-07-2011, 03:06 AM

Originally Posted by Gardo

Steeltoe do you have a G$D Pipe? I have a Custom Weaver pipe the dimensions i think are a bit different my pipe sits a bit power and I noticed it is scraping the exhaust wrap.

The lever I also got from Weaver

Yes G&D long pipe. However, I think that your lever may be a bit different than the one that CCW sells on their website, or maybe it just looks that way in the pics. Please post a straight-shot pic of your lever in the upright position, so I can compare it to the one that I have on my bike... which looks like the one found in the 3 pictures in the link below (scroll down). I may be wrong, but in looking at the pics that you have posted, your current one (not the one in the last older pic that you posted following your video) does seem to be a bit different, but again, it may just be the angle. Thanks man.

http://shop.clevelandcyclewerks.com/...ickstart-lever

**Gardo** · 10-07-2011, 04:14 AM

SteelToe - my kick lever is different here's the one from CCW

and mine [IMG]

[/IMG]

Thread: CCW tha Heist

Thread Tools

Display

Similar Threads

CCW

My day at PIT Motors LTD and the CCW Tha Heist

Bookmarks