Results 1 to 10 of 69
|
-
#1 pulse adrenaline 150cc big bore kit fitted05-07-2012, 07:39 PM
hi guys, as you may have seen ive been pestering about the kit,
i finally ordered one off ebay and with the help of my mate (who happens to be a very good part time bike mechanic) we fitted the kit today,
the first thing i did was to paint the barrel black so that it didnt stand out so much when it was fitted.
it only really took around 2 hours to go from rolling the bike in to rolling it back out again, everything went smoothly and there were no problems.
i rode the bike home afterwards, i cant abuse it yet as it needs to run/bed in again but initial feelings are very good, there is much more torque than i was expecting,
here are a couple of pictures from the build and a short video i took of it running, apologies for the sound quality, i do not have a proper camera only iphone4.
http://youtu.be/ssJXEWU21ms
james
un painted by offtheclockuk, on Flickr
painted by offtheclockuk, on Flickr
starting to strip by offtheclockuk, on Flickr
old small piston by offtheclockuk, on Flickr
new big piston by offtheclockuk, on Flickr
finished and ready to run by offtheclockuk, on Flickr
-
#2 Re: pulse adrenaline 150cc big bore kit fitted05-07-2012, 07:44 PM
a couple of things i forgot to mention, i changed the pilot jet to 17.5 and the main jet to 115.
also about a week after the kit arrived, fedex sent me a bill for £15, aparently import duty and administration charges, cheeky fuckers (pardon my french)!
james
-
#3 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
05-07-2012, 09:06 PMI'm ordering mine soon, I can't wait to fit it :3
You should grind off the 147cc mark if you aren't going to declare this to your insurer and/or you are still on a CBT as I'm pretty sure that this invalidates your tax and insurance otherwise. I was looking into breaking in procedures today and a lot of sources say that you should push it a little bit and bring the revs up quite high as the piston rings will seat better.
Where did you get the pilot jet from?Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#4 Re: pulse adrenaline 150cc big bore kit fitted05-07-2012, 09:16 PM
Jet came from eBay, if I can find the link I'll post it here,
I did think about ditching the markings, may still do if I decide I like the performance
-
#5 Re: pulse adrenaline 150cc big bore kit fitted05-07-2012, 10:51 PM
should be a minimum of 500 miles to run it in properly excessive revs during this stage with cause it have a increased friction that will make the cylinder wall more scored than if it was looked after during the 500 miles a engine that isnt run in might be 1-2mph quicker but then its life is signifcantly reduced some say up to 10,000miles less in a car engine by not running it in carefully
Kennon
-
#6 Re: pulse adrenaline 150cc big bore kit fitted05-08-2012, 05:10 AM
I've always broken stuff in gently, the original piston had hardly any marks at all on it, and the cylinder bore was unmarked, 700km of very gentle varied engine speeds, then 4000km of quite hard use, plenty of full throttle and 9000rpm and more!
-
#7 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
05-08-2012, 09:37 AMSinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#8 Re: pulse adrenaline 150cc big bore kit fitted05-09-2012, 08:23 AM
Disaster about 62mm mod http://www.motorfans.com.cn/bbs/t_17307341_1.htm
"barrel" modded locally / Piston from "net" seller. The conclusion in that thread IS something done wrong locally for the barrel
-
#9 Re: pulse adrenaline 150cc big bore kit fitted05-09-2012, 09:47 AM
What?!
I can't translate, is that the same as my kit?
-
#10 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
05-09-2012, 09:53 AMYou got the eBay one didn't you? You can see in the pictures that the cam chain tentioner hole is a different shape so you must have a different one.
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
« Previous Thread | Next Thread » |
Similar Threads
-
Pulse Adrenaline 150 big bore Kit
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 19Last Post: 08-04-2021, 08:24 AM -
Pulse adrenaline big bore help please
By offtheclockuk in forum Modifications (Cosmetic and Performance)Replies: 12Last Post: 07-08-2014, 12:31 AM -
Pulse Adrenaline 125
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 7Last Post: 10-09-2012, 11:32 PM -
Pulse Adrenaline
By jonesyboy in forum Welcome to MCM!Replies: 1Last Post: 10-15-2011, 05:59 PM -
Pulse Adrenaline
By Rodders in forum Dirt n' Dual-SportReplies: 24Last Post: 02-01-2011, 04:47 PM
Tags for this Thread |