Results 71 to 80 of 121
|
-
#71 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
07-26-2012, 09:38 AM
Changed oil 300km into break-in. The next change is pending at 800km.
Since the bike seems to be running fine and I've tightened everything up, I decided to treat it to a couple of bags.
IMG_0794.jpg
IMG_0795.jpg
IMG_0796.jpg
-
#72 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
07-26-2012, 11:27 AM
You miss only a sheep skin seat cover to complete the picture.
Let me guess: you had some trouble to find suitable side bags?Ask me nothing - I DO NOT speak english. Really...
-
#73 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
07-26-2012, 11:05 PM
No, not really. Just typed in "leather side bags" on taobao and got like a thousand offers. these particular ones aren't for this bike exactly. Though the front one is universal, the side bags were advertised as specifically fitting a CFMoto "Baboon" bike. I gave it a shot and I like what came out of it.
-
#74 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
07-27-2012, 04:33 AM
I asked this because I noticed that the rear turn indicators are placed not quite "sidebags friendly", not allowing installation of some bigger bags.
Ask me nothing - I DO NOT speak english. Really...
-
#75 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
07-27-2012, 05:42 AM
Right. In fact I had to bend the blinkers a bit to accommodate the bags. They bend quite easily, btw. Could probably remove/re-fit them altogether but didn't take the trouble doing that - those bags are enough for a raincoat and a full-size lock, they're leather, they look sexy. 'nuff for me.
-
#76 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
07-27-2012, 06:53 AM
Well, to me, they look like ammunition pouches of PTRS shooter.
Ask me nothing - I DO NOT speak english. Really...
-
#77 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
07-28-2012, 12:47 AM
Which might have been the design inspiration for whoever crafted them :)
-
#78 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
08-04-2012, 01:17 AM
OK, so the bike's been fine. More than that - I rode it to 马鞍山 and back without any problems whatsoever. Sits happily at 80km/h two-up. Can go more than that, but that really strains the engine. I guess will cruise at about 100km/h solo easily.
BTW, I somewhat cafe'd it just for the fun of it.
IMG_0823.jpg
Those handlebars were about 130 yuan from taobao. Good quality, fast shipping, easy setup. Look nice too. Actually, the repair guy said the bars were better than OK and he saw those for the first time. They're 31mm so I guess will fit majority of 150-250 cc bikes. Had to be carved out for my bike, though.
IMG_0824.jpg
Bar-end mirrors are Rizoma ripoff, almost 200 yuan, CNC-d. Look kickass, definitely a headturner. Thought they'd be inconvenient and now I understand how wrong I was. Those mirrors give a wider viewing angle that the regular ones do and they have some reflective or light-absorbing coating (I think the call it anti-glare, but I'm not sure), which is very helpful riding sunset/night.
IMG_0825.jpg
IMG_0827.jpg
-
#79 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
08-05-2012, 01:26 AM
OK, so today the almighty QingQi lost spark right on the road. Which means I was late for class which means trouble. The bike's new, hasn't been abused, hasn't been ridden hard, has been properly maintained and taken care of. Now, QingQi, I got a question here: WTF?
-
#80 Re: QingQi U-Zeal (轻骑 125-3B): Back to the Basics
08-05-2012, 02:18 AM
Check your ground on your kill switch, maybe it was weakened, and subsequently lost with the handle bar change. If not then you or your mechanic have to work backward from there to figure out what is failing.
« Previous Thread | Next Thread » |
Similar Threads
-
I'm back (again) :)
By Ekkicore in forum Welcome to MCM!Replies: 40Last Post: 02-12-2012, 04:42 AM -
Taking Back Saigon
By matt999tye in forum Ride Reports and MeetingsReplies: 8Last Post: 02-04-2011, 11:22 AM -
I'm back and my deepest apologies
By moilami in forum Off Topic DiscussionsReplies: 10Last Post: 12-15-2010, 11:46 AM -
Slabbing to Moganshan (and back)
By euphonius in forum Ride Reports and MeetingsReplies: 20Last Post: 08-26-2010, 02:40 AM -
errr i'm back
By ChinaKnight in forum Welcome to MCM!Replies: 6Last Post: 07-26-2010, 08:14 PM