Results 31 to 40 of 46
|
-
#31 Re: Benelli BJ600GS - lessons learned08-27-2012, 05:39 PM
Whoa there Sammy, a bit sensitive or what? You really need to keep small niggles like this in perspective, on what is a Chinese bike, purely a small factory assembly error.
I've been rebuilding my current bike for the last three years so the bloody thing can run properly.Last edited by ZMC888; 08-27-2012 at 06:32 PM.
-
#32 Re: Benelli BJ600GS - lessons learned08-27-2012, 05:54 PM
Also what's the point in trying to second-guess 998? He knows his stuff.
Last edited by ZMC888; 08-27-2012 at 06:33 PM.
-
#33 Re: Benelli BJ600GS - lessons learned08-27-2012, 07:45 PM
I would be upset if the sprocket was not secured with a loose/damaged bolt and then I had to disassemble the wheel.
You should inspect those Cush Drive Inserts periodically for uneven wear, a quarter turn every so often.
Just for a perspective on quality.
http://www.apriliaforum.com/forums/s...730-Cush-DriveLast edited by MJH; 08-28-2012 at 02:56 AM.
-
#34 Re: Benelli BJ600GS - lessons learned
- Join Date
- Aug 2012
- Location
- China
- Posts
- 13
-
#35 Re: Benelli BJ600GS - lessons learned
-
#36 Re: Benelli BJ600GS - lessons learned
-
#37 Re: Benelli BJ600GS - lessons learned
- Join Date
- Mar 2009
- Location
- Guang frigging Zhou
- Posts
- 385
10-05-2012, 12:51 AMSammyDV, hoping to hear more about your adventures with the Benelli BJ600GS. I was just looking at these yesterday and very nearly bought one. It's been at least another month now, how are the 2 of you getting on?
-
#38 Re: Benelli BJ600GS - lessons learned
-
#39 Re: Benelli BJ600GS - lessons learned
- Join Date
- Jun 2013
- Location
- langkawi
- Posts
- 2
07-30-2013, 03:52 AMHi Guys,
Overall how is the quality of this bike so far and how far km's have you all made on this bike. Appreciate the feed back as I wish to buy one soon. Thank you.
-
#40 Re: Benelli BJ600GS - lessons learned
- Join Date
- Aug 2013
- Location
- Ina
- Posts
- 6
08-09-2013, 10:16 PMChange the engine oil as soon as the bike arrived because I dont really know the oil quality from the factory.
The oil is very dirty and lost of metal grains sticked to the oil screw magnet.
Guess I am not the only one here.
« Previous Thread | Next Thread » |
Similar Threads
-
Qjiang QJ600GS / Benelli BJ600GS - rumors thread
By felix in forum StreetReplies: 309Last Post: 03-31-2014, 02:19 PM -
Where to buy a Benelli BJ600GS in Shanghai (reliable reseller)?
By Topmanda in forum StreetReplies: 24Last Post: 12-06-2012, 08:03 AM -
Benelli
By MJH in forum Industry News and Moto TalkReplies: 1Last Post: 04-22-2012, 07:50 AM -
lessons learned the hard way ...
By jape in forum Off Topic DiscussionsReplies: 11Last Post: 01-31-2011, 06:59 PM -
Benelli Rumors
By ZMC888 in forum Industry News and Moto TalkReplies: 5Last Post: 04-08-2010, 03:21 PM
Tags for this Thread |