Thread: My Review of the CFMOTO 650NK
Results 11 to 20 of 90
|
-
#11 Re: My Review of the CFMOTO 650NK
- Join Date
- Jul 2011
- Location
- Shanghai
- Posts
- 57
09-24-2012, 03:40 PMthe latest issue of Magazine Motorcyclist has the review of CF650NK.
-
#12 Re: My Review of the CFMOTO 650NK09-24-2012, 10:22 PM
http://www.motorcyclistonline.com/fi...k/viewall.html
CFMoto 650 NK | First Ride
By Alan Cathcart, Photography by Stephen Piper
They say: “Meet China’s first full-sized motorcycle.”
We say: “Comparable quality for less cash.”
The Chinese-made CFMoto 650 NK can’t help but remind you of the Japanese invasion of the 1960s. Just as Honda’s game-changing CB450 was the first Japanese motorcycle Western customers saw as fun as well as functional, sporty in addition to affordable, the naked NK appears to be the first “real” bike to emanate from the world’s largest motorcycle market that is the People’s Republic of China.
Powered by a parallel-twin, 649cc engine that matches Kawasaki’s ER-6n in almost every respect—there’s little denying that this is a knock-off of a proven Japanese design—the NK is still the first motorcycle to come out of China with an engine larger than 250cc. And after riding the NK, I’m convinced that it’s worthy competition for any budget or beginner’s bike from Asia or Europe, and available at a significantly lower price. In Australia, the 650 NK will sell for just more than half as much as its Kawasaki competitor.
CFMoto’s parent company, Chunfeng Holding Group, was founded in 1989 but didn’t start making complete motorcycles until 2000. Development of the 650 NK began in 2009 and the bike was launched in Asia early in 2011. Pending EPA homologation, shipments of China’s first middleweight motorcycle will begin steaming for America. Because the bike hadn’t passed Australian homologation yet, my test ride took place on the Broadford circuit in Victoria. I admit I approached the CFMoto armed with every possible prejudice against Chinese-made motorcycles, all born from hands-on experience riding various poorly made 250cc singles.
So from the first moment I first saw the CFMoto 650 NK, I was ticking mental boxes. Styling: hmm, not bad, in fact pretty sharp with its stubby R6-type exhaust, bright red frame and black bodywork that’s so reminiscent of the ER-6n. The paint depth and overall finish look equal to any Japanese-made budget bike, though the plastic switchgear still seems a little low-rent, and unpolished aluminum brake and clutch levers look rather drab.
But the whole bike has an air of substance—it feels solid and well put together, not flimsy. It starts and idles smoothly, with a fairly meaty exhaust note and an effective counter balancer that does a better job of eliminating engine vibes than the Kawasaki mill it’s modeled after. The riding position is rational, and the footrests are low enough to provide room for taller riders without limiting cornering clearance.
The transmission clicked precisely into gear and during some 45 laps of the Broadford circuit I never missed a single shift. For what’s sure to be a very inexpensive bike, the 650 NK works better than it should. The parallel-twin engine is torquey, free-revving and smooth. Acceleration is determined rather than assertive, but it’s sufficiently strong to be satisfying, and the torque peak is spread widely enough that there’s no point in revving it anywhere near redline. The motor pulls from 3000 rpm upwards, with power building all the way to the rev limiter at 10,800 rpm.
With Kayaba’s Chinese affiliate providing the 41mm telescopic forks and centrally mounted shock (not offset, as on the ER-6n and Ninja 650), the 650 NK’s suspension compliance was frankly much better than I expected, with good ride quality and the ability to absorb bumps and ripples in the road surface without affecting the steering. And the way the bike steers is indeed excellent, delivering poise plus stability and allowing me to pick lines that would avoid the oil patches left by the previous weekend’s vintage bike races. Equipped with Cheng Shin tires labeled simply “Radial,” I was quite cautious entering corners on the NK. The tires stuck, though, and as I added speed and lean angle, the long hero tabs began dragging and soon I was using the toe sliders on my Kushitani boots.
The brakes on other Chinese bikes I’d ridden were awful, and to begin with the NK’s twin-piston calipers and 300mm petal discs simply didn’t work very well. When I pulled in after a dozen laps, I could smell fumes coming off the brakes, and assumed I’d glazed them. I continued riding, and the brakes began to improve to the point that they worked as well as any comparable setup from Europe or Japan. I hadn’t glazed the brakes, I was bedding them in!
Which leaves just one key aspect I couldn’t answer in my one-day Broadford bash—how well will the 650 NK wear the passage of time and miles? It’s impossible to guess after even a thorough test ride, but if it’s as well manufactured as it has been engineered, then this bike may have the same impact on the marketplace as the Honda CB450 did 47 years ago, becoming the bike that introduces Chinese motorcycles to the Western world. The NK could well be a game changer.
-
#13 Re: My Review of the CFMOTO 650NK10-24-2012, 10:07 AM
Oy mates,
550km now and just had a problem with the fuel injection system which seems to have a malfunction. I had difficulties starting the bike yesterday, it seemed to me that the automatic starter wasn’t working well, but today shit hit the fan after driving 2km:
The fuel injection indicator turn itself on while driving, then off, meanwhile the bike started to puff and I literally stalled after few seconds on the road. Had a hard time starting it again as the Fuel injection system seems to be totally fucked up, I drove the 2 last kilometers with the clutch lever half gripped to avoid stalling a 2nd time.
Will go to the store for the maintenance tomorrow and see wtf is going on.Last edited by Topmanda; 10-25-2012 at 12:00 AM.
-
#14 Re: My Review of the CFMOTO 650NK10-24-2012, 10:27 PM
I hope you've just got a case of poor quality fuel and maybe a blocked injector rather than anything wrong with the bike. Good luck.
-
#15 Re: My Review of the CFMOTO 650NK10-25-2012, 07:21 AM
After an electronic check-up of the bike it seems that the TPS (Throttle Position Sensor) was malfunctioning and has been replaced: problem solved, the bike is behaving normally again.
Plus the LED system has been corrected, now on headlight position both LED are ON (headlight and position light) which is a way more efficient than the standard.
Rear light has been changed with a new one as 3 small LEDS were dead.
The mirrors have been changed with Rizoma’s, will post pictures in the near future.
Cheers.
-
#16 Re: My Review of the CFMOTO 650NK10-27-2012, 05:52 AM
Ok Here it is, headlight position has been electrically corrected so that all LEDs are ON + new mirrors Rizoma
IMG-20121027-00081.jpgIMG-20121027-00082.jpg
-
#17 Re: My Review of the CFMOTO 650NK10-27-2012, 06:34 AM
Where are the mirrors?
Ask me nothing - I DO NOT speak english. Really...
-
#18 Re: My Review of the CFMOTO 650NK
-
#19 Re: My Review of the CFMOTO 650NK10-28-2012, 01:28 PM
has anyone seen this baby,,,,,,,,,,so cool, was taken at the quangzhou fair
How cool these colours go togethercfm.jpg
-
#20 Re: My Review of the CFMOTO 650NK11-01-2012, 09:04 AM
Nice! Is it a special edition or what?
« Previous Thread | Next Thread » |
Similar Threads
-
CFMOTO USA
By MJH in forum Industry News and Moto TalkReplies: 29Last Post: 10-18-2012, 03:05 PM -
CFmoto 650NK vs Benelli BJ600GS which do you prefer?
By ZMC888 in forum StreetReplies: 21Last Post: 09-05-2012, 05:28 AM -
CFMoto 650NK sport bike
By Lao Jia Hou in forum StreetReplies: 103Last Post: 08-28-2012, 04:23 AM -
CFmoto 'Baboon' 125
By felix in forum StreetReplies: 19Last Post: 07-27-2012, 07:48 AM -
Wanted: CF Moto 650NK/TR Literature
By wpetraska in forum Bike Market - ClassifiedsReplies: 0Last Post: 05-18-2012, 08:56 PM