Results 21 to 30 of 69
|
-
#21 Re: pulse adrenaline 150cc big bore kit fitted05-29-2012, 01:47 AM
De-cat is more useful than CDI mod.
This http://item.taobao.com/item.htm?id=10286665697 Denso (w/o rev limits, More aggressive curve ) is the prefect match in theory BUT it's age ...
4-curve http://item.taobao.com/item.htm?id=9153886492
If u're crazy about this topic, why NOT use a "programmable" & create ur own curve/ spark strength ... http://item.taobao.com/item.htm?id=7580391030
-
#22 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
06-01-2012, 10:54 AMofftheclockuk what performance changes did you notice after you installed the big bore kit in terms of top speed? I've not tested mine fully but I can only manage about 55mph at wot. I don't know if I need to change the gearing or jetting.
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#23 Re: pulse adrenaline 150cc big bore kit fitted06-01-2012, 09:11 PM
Plenty more torque came as a result of the mod, I've done about 1000k on it now, so it's pretty much run in, I went next size up on the pilot jet and 112.5 on the main, I think probably I could go up one again for the main jet it tails off around 60-65 mph,
The rear sprocket it pretty much shot after 5300km, when I order a replacement I'm going to get a new one with 2 teeth less to further reduce the need to suffer high revs just to cruise along
-
#24 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
06-01-2012, 09:20 PMYeah I've pretty much got the same results as you, the top speed should be a fair bit more though, I could pretty much hold 70mph with my 125cc cylinder. I think I need to change the jetting a little more and fit my 17 tooth sprocket and see how that goes.
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#25 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Feb 2012
- Location
- seccessors
- Posts
- 2
11-11-2012, 10:05 PMHi offtheclockuk.
I'm thinking of doing this to my Apache 2010 plate. It needs some TLC so I'm thinking of doing all this too.
Could you help me out in terms of which one you ordered (link if you could please!) And any advice or do's/donts. And from what I've read there doesn't seem to be any top end speed increase at all?
Basically, is it worth doing? Thanks in advance buddy.
-
#26 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
11-11-2012, 10:28 PMKit from here http://www.ebay.co.uk/itm/SUZUKI-GS1...item1e73652bde ask for the flat piston. Also ask if you can get a spare set of gaskets and piston rings since if you need them in the future they will be a pain to get.
Get your self a good socket set and a Haynes manual for chinese motorcycles, follow the manual and double check everything and you will be fine.
It's been about 5 or 6 months since I installed my big bore kit and I think it was worth it. I think I have gained a lot of low end power but not much power in the high rmps because the chlinder head, cam and carb can't cope with the extra 20% of airflow needed, because of this I am now unable to go above 8.5k rpms and going from 7k to 8.5k is slow. Fitting a 17 tooth front sprocket did help with this since I can do 70mph at about 7200 rpm whereas before it would have required maybe 8000 or more. I also upgraded my carb to a 26mm which gave me a gain in top speed of about 5mph on average. I have a camshaft from the 200cc version of my engine which I can't be arsed to install but I think it will help with the lack of power at high rpms once fitted. Boring out the carb boot that sits between the carb and the cylinder head to 26mm should help too.Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#27 Re: pulse adrenaline 150cc big bore kit fitted11-11-2012, 10:54 PM
Rings -SAME as CG150. | Gaskets -SAME as GS150 (a old Taiwanese model
)
The kit also can ordered via agent:
http://item.taobao.com/item.htm?id=20194204418 Shunde. Guangdong -That seller runs a workshop & knows those stuff
http://item.taobao.com/item.htm?id=13385655225 Jinan, Shandong -The 1st shop selling that "flat / 14mm pin " kit in PRC.
-
17T are "special" item from Kaifeng, Henan. http://s.taobao.com/search?spm=a230r...e-asc#J_Filter Most seller had FREE "extra two links" deal if u asks them.Last edited by humanbeing; 08-02-2014 at 09:19 PM.
-
#28 Re: pulse adrenaline 150cc big bore kit fitted11-12-2012, 04:41 AM
So far I have not had a chance to lay hands on these Suzuki based engines, and I'd like to know this: is it possible to increase displacement of 125 cc engine to 200 cc, using parts (crankshaft, piston, cylinder, head...) from the same Suzuki based 200 cc engine?
Ask me nothing - I DO NOT speak english. Really...
-
#29 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Feb 2012
- Location
- seccessors
- Posts
- 2
11-12-2012, 11:32 AM
-
#30 Re: pulse adrenaline 150cc big bore kit fitted11-12-2012, 11:55 AM
http://www.motorfans.com.cn/bbs/view...originator=yes BUT that guy choose 65.5mm piston finally http://motorcycle.sh.cn/viewthread.p...originator=yes
« Previous Thread | Next Thread » |
Similar Threads
-
Pulse Adrenaline 150 big bore Kit
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 19Last Post: 08-04-2021, 08:24 AM -
Pulse adrenaline big bore help please
By offtheclockuk in forum Modifications (Cosmetic and Performance)Replies: 12Last Post: 07-08-2014, 12:31 AM -
Pulse Adrenaline 125
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 7Last Post: 10-09-2012, 11:32 PM -
Pulse Adrenaline
By jonesyboy in forum Welcome to MCM!Replies: 1Last Post: 10-15-2011, 05:59 PM -
Pulse Adrenaline
By Rodders in forum Dirt n' Dual-SportReplies: 24Last Post: 02-01-2011, 04:47 PM
Tags for this Thread |