Thread: crf230 piston compression height
Results 1 to 5 of 5
|
-
#1 crf230 piston compression height
- Join Date
- Sep 2012
- Location
- Australia
- Posts
- 30
04-21-2013, 08:13 AMHi again fellow moto dudes, does anyone out there know the compression height of a stock crf230 piston? That is, the distance from the centre of the gudgeon pin hole to the top of the piston. Please please please help.
-
#2 Re: crf230 piston compression height04-22-2013, 09:35 AM
its just a little bit less than the distance from the pin to the head.
you are welcome.
why do you want to know?
are you planning to use a different piston?
-
#3 Re: crf230 piston compression height
-
#4 Re: crf230 piston compression height
- Join Date
- Sep 2012
- Location
- Australia
- Posts
- 30
04-23-2013, 01:15 AMThanks for your replies. Zhu: I am interested in using a crf 230 piston in my chinese cb250 engine. They are the same bore and stroke but I think the compression height is a little less on the crf piston.
Humanbeing: Where did you find this info? It's great. However, is this a picture of a crf piston or a chinese piston? Just had a better look and it's a chinese one, I think the compression height for the crf piston is a little lower than the cb250 piston. I want to try a high comp honda piston but I thought the lower comp height of the high comp piston might be necessary for it to work but if it's the same as a stock crf piston there's probably nothing for me to gain out of it.
Would you guys know if the chinese make a High comp piston for this engine?
Thanks again, Gus.Last edited by gusmanxtr; 04-23-2013 at 01:36 AM.
-
#5 Re: crf230 piston compression height04-24-2013, 11:35 PM
Found in a Taiwanese maker http://www.jccpiston.com/comm/upfile/d_120417_06359.xls
Difference btw CRF230F "ME09" (KFB) is 0.2mm. Chinese 223 is based on the domestic "MD33" (SL) version.
The Japanese soultion is 67mm kit.
http://www.takegawa.co.jp/2008_takeg...ode=1#page=566Last edited by humanbeing; 04-25-2013 at 03:07 AM.
« Previous Thread | Next Thread » |
Similar Threads
-
Change your CG250 67mm air cooled engine (167FMM)to 70mm bore,Kit include piston kit
By barnone in forum Modifications (Cosmetic and Performance)Replies: 14Last Post: 08-16-2014, 03:02 PM -
will a crf230 piston fit in my cb250 engine?
By gusmanxtr in forum Modifications (Cosmetic and Performance)Replies: 0Last Post: 04-18-2013, 03:07 PM -
150cc piston spec
By 50dude in forum Modifications (Cosmetic and Performance)Replies: 3Last Post: 05-19-2011, 12:55 AM -
PROPER SEAT HEIGHT
By dp-ktm in forum Industry News and Moto TalkReplies: 0Last Post: 04-22-2011, 05:42 AM -
DOUBLE PISTON CALIPER SHAFT RUBBER BOOTS
By txm123 in forum Parts DeskReplies: 6Last Post: 12-18-2009, 02:24 PM