Adventure Motorcycle Magazine Subscribe Now

Page 417 of 634 FirstFirst ... 267367397407415416417418419427437467567 ... LastLast
Results 4,161 to 4,170 of 6336
  1. #4161 Re: Dong Fang DF 250 RTB Bobber Information 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Madison, WI
    Posts
    23
    Thanks so much!!! Any ideas on a clutch cable replacement other than custom?
    Reply With Quote  
     

  2. #4162 Re: Dong Fang DF 250 RTB Bobber Information 
    Senior C-Moto Guru axa's Avatar
    Join Date
    Apr 2013
    Location
    Lower Hudson Valley Elevation: 240ft
    Posts
    580
    Quote Originally Posted by barnone View Post
    Hope that photo is wrong on the link you posted because that is not the right sprocket. I've had good success with the guy at Old Bike Barn so I am sticking with him. How much does your guy charge for shipping?
    thats the sprocket, photo is often wrong with Amazon...
    shipping is free with a $25 purchase, 2 day free if you have the prime service.

    sorry i thought everyone knew about Amazon, I always check there first as their volume drives prices thought the floor.
    Full disclosure, owned the stock for almost 15 years
    Reply With Quote  
     

  3. #4163  
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Madison, WI
    Posts
    23
    Have you been able to find the washer and circ clip that holds on the sprocket?
    Reply With Quote  
     

  4. #4164 Re: Dong Fang DF 250 RTB Bobber Information 
    Senior C-Moto Guru barnone's Avatar
    Join Date
    Dec 2009
    Location
    SWFL WNC
    Posts
    2,154
    Quote Originally Posted by Tedub View Post
    Have you been able to find the washer and circ clip that holds on the sprocket?
    What do you mean? Are you missing the big washer and the circle clip? I reused the ones that was on my 2012 DF.
    Vince
    2021 Ural cT
    2022 Dong Fang DF250RTG
    2021 Ice Bear 150cc scooter
    2020 Ice Bear 150cc Scooter
    Reply With Quote  
     

  5. #4165 Re: Dong Fang DF 250 RTB Bobber Information 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Madison, WI
    Posts
    23
    No. Just looking for back ups. Felt like I was going to break the clip when I removed using needle nose pliers in reverse. How did you take the clip off?
    Reply With Quote  
     

  6. #4166 Re: Dong Fang DF 250 RTB Bobber Information 
    Senior C-Moto Guru axa's Avatar
    Join Date
    Apr 2013
    Location
    Lower Hudson Valley Elevation: 240ft
    Posts
    580
    Quote Originally Posted by Tedub View Post
    No. Just looking for back ups. Felt like I was going to break the clip when I removed using needle nose pliers in reverse. How did you take the clip off?
    There is something called a snap ring plier, rings are often very difficult to remove otherwise. Use them and you wont likely damage the ring.
    This set is a real deal for this size ring, i cant fathom what the few bad reviews are all about.
    http://www.harborfreight.com/10-inch...set-97406.html
    Reply With Quote  
     

  7. #4167 Re: Dong Fang DF 250 RTB Bobber Information 
    Senior C-Moto Guru axa's Avatar
    Join Date
    Apr 2013
    Location
    Lower Hudson Valley Elevation: 240ft
    Posts
    580
    so how many miles do you other 2012 drivers get before needing a fill?

    I seem to get close to 95 (make that 105), indicated, of course there is a notable amount of gas left in the tank, just this tank seems to push it back, and has the petcock mounted a bit high and forward.
    Last edited by axa; 08-07-2013 at 03:45 AM.
    Reply With Quote  
     

  8. #4168 Re: Dong Fang DF 250 RTB Bobber Information 
    Senior C-Moto Guru barnone's Avatar
    Join Date
    Dec 2009
    Location
    SWFL WNC
    Posts
    2,154
    Quote Originally Posted by axa View Post
    so how many miles do you other 2012 drivers get before needing a fill?

    I seem to get close to 95 indicated, of course there is a notable amount of gas left in the tank, just this tank seems to push it back, and has the petcock mounted a bit high and forward.
    I got 78 MPG and 81 MPG on the last two fill ups on my 2012.There is almost no stop and go traffic here in the mountains. I put two gallons in to fill it up when my tank was new and empty so say 120 miles should be safe assuming there is gas not too far away.

    What kind of MPG are you getting?
    Vince
    2021 Ural cT
    2022 Dong Fang DF250RTG
    2021 Ice Bear 150cc scooter
    2020 Ice Bear 150cc Scooter
    Reply With Quote  
     

  9. #4169 Re: Dong Fang DF 250 RTB Bobber Information 
    Senior C-Moto Guru barnone's Avatar
    Join Date
    Dec 2009
    Location
    SWFL WNC
    Posts
    2,154
    Quote Originally Posted by axa View Post
    There is something called a snap ring plier, rings are often very difficult to remove otherwise. Use them and you wont likely damage the ring.
    This set is a real deal for this size ring, i cant fathom what the few bad reviews are all about.
    http://www.harborfreight.com/10-inch...set-97406.html
    Yep, those HF 10" snap ring pliers are great for removing the circlip but my set is in Florida so I did it the hard way with small screws drivers and a small punch that fit in the hole.
    Vince
    2021 Ural cT
    2022 Dong Fang DF250RTG
    2021 Ice Bear 150cc scooter
    2020 Ice Bear 150cc Scooter
    Reply With Quote  
     

  10. #4170  
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Madison, WI
    Posts
    23
    I get around 60 in town and 80 and trips to the country. Madison WI
    Reply With Quote  
     

Similar Threads

  1. Help ID this customized chinese bobber please?
    By fonzerelli in forum Street
    Replies: 6
    Last Post: 01-16-2022, 01:39 AM
  2. DD350E-2 Bobber
    By xacarrere in forum Manufacturers and Importers
    Replies: 2
    Last Post: 08-28-2015, 12:03 PM
  3. Bobber Bikes
    By Geronimo in forum Sidecars
    Replies: 12
    Last Post: 07-20-2011, 05:02 AM
  4. my 2nd 16 inch bobber
    By Geronimo in forum Sidecars
    Replies: 3
    Last Post: 09-13-2010, 11:10 AM
  5. JH600B Information Wanted
    By blazeafar in forum Welcome to MCM!
    Replies: 1
    Last Post: 04-29-2008, 12:38 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •