CFMoto 650TR side stand lengthening mod

[bikerdoc]

CF650TR_Clubfoot_04.jpg

With bike up on racing stand, removed the fake 'frame' plastic 'cover' to allow better access to the side stand mount.

CF650TR_Clubfoot_05.jpg

Using an 8mm socket, removed the bolt holding the side stand switch. Then removed the 16mm hex nut from behine the side stand mount. Lastly removed the 12mm bolt securing the stand to the frame mount.

CF650TR_Clubfoot_06.jpg

Securing the side stand foot in my portable work bench, set about marking the adaptor holes to the underside of the side stand (foot plate), before removing the adaptor and proceeding to drill out the holes).

CF650TR_Clubfoot_07.jpg

Part way through the drilling process.

CF650TR_Clubfoot_08.jpg

The four different sized drill bits used to drill out to a 7mm dia. hole. Keeping in mind the side stand is cast steel, and likely the foot is made from a hardened steel.