Thread: 150 from a 125
Results 1 to 5 of 5
|
-
#1 150 from a 125
- Join Date
- Dec 2013
- Location
- United Kingdom
- Posts
- 5
12-26-2013, 09:12 PMCan a standard cg clone barrel be bored out to 62 mm to take a 150 piston as I am struggling to find a big bore kit in the Uk at the moment and would like the motor to look stock too.
Is the outer diameter of a 150 barrel 68mm, the same as a 125
-
#2 Re: 150 from a 12512-26-2013, 10:36 PM
There's 150 kit that can direct fit the good old Honda http://item.taobao.com/item.htm?id=12959476654
---
125 vs 150
http://www.motorfans.com.cn/bbs/view...originator=yes
-
#3 Re: 150 from a 125
- Join Date
- Dec 2013
- Location
- United Kingdom
- Posts
- 5
12-27-2013, 09:22 AMI do not understand the exchange rates. How much for the full cylinder kit with gaskets, and a 150 head including postage to the uk?
Thanks for your help.
-
#4 Re: 150 from a 125
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
01-03-2014, 06:07 PMTo roughly convert Chinese Yuan in to Pounds Sterling you divide it by 10 (or Google 145 yuan to pounds). To get it to the UK however you need to use a 3rd party company (or agent) to order and ship it for you, I use taobaonow.com. On top of the initial cost of £14.57 you need to pay the agent's fee (£5 minimum I think) and the international postage which is usually quite high. Just to give you a rough idea of how much it will be my big bore kit was about £80 delivered.
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
- Join Date
- Nov 2011
- Location
- fuck off
- Posts
- 528
01-06-2014, 06:56 AMI get stuff sent from Shenzhen without the need of agents etc etc
Cheap sea postage is possible etc upto 20kg
I've got friends in Shenzhen how send stuff as I want it via how I want it all the time etc
« Previous Thread | Next Thread » |