Results 4,811 to 4,820 of 6336
|
-
#4811 Re: Dong Fang DF 250 RTB Bobber Information
-
#4812 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Dec 2013
- Location
- TX
- Posts
- 92
01-21-2014, 02:40 AMThose who are trying to save us from ourselves say teflon is bad - cancer in rats or something. I don't much care about sick rats, so is this still available?
-
#4813 Re: Dong Fang DF 250 RTB Bobber Information
-
#4814 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Apr 2012
- Location
- Central Texas
- Posts
- 161
01-26-2014, 07:55 AMI just use commercially available chain oil. Once I oil it and ride it, some oil winds up on the back of my t-shirt. Had to throw a way a t-shirt because of this LOL. Which is why another member here a while back suggested a dry lube alternative. Wish I knew that before I bought my can of wet lube.
-
#4815 Re: Dong Fang DF 250 RTB Bobber Information01-28-2014, 05:56 PM
Not that I think that we need an oil cooler on our DFs but has anyone tried this cooler?
http://item.taobao.com/item.htm?id=1589157186
While I was on taobao I looked for a big bore kit and found this one that claims 250 CC but only 67 mm bore.
Cheap enough at $28.10 plus agent fees and shipping.
http://item.taobao.com/item.htm?spm=...id=15238969020Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#4816 Re: Dong Fang DF 250 RTB Bobber Information01-29-2014, 05:16 PM
From Soberlife:
"I need help... have a 2012 donfang mc-d250rtc. My headlights will not function. The running light is on but when i start the bike the headlights do not switch on. the only way I have lights is if i switch on the highbeams... then only the left side comes on...."
He PMed me but maybe someone that has had this problem knows the answer?
Sounds like the low beam is not working.
I'd check the bulb first.Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#4817 Re: Dong Fang DF 250 RTB Bobber Information
-
#4818 Re: Dong Fang DF 250 RTB Bobber Information02-05-2014, 01:17 PM
0202141058-01.jpg
http://www.ebay.com/itm/360834770780...84.m1497.l2649
Max head temp I have seen so far is about 380 F.
IMG_2363.jpg
Also have one on my Ural where I have seen head temp of 422 F.
The temp on both bikes are highest on high speed runs () and go down when idling at a stop.
Supposedly danger temp is 500 F.
I ordered one of the oil coolers off Taobao to try.
http://item.taobao.com/item.htm?id=1589157186Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#4819 Re: Dong Fang DF 250 RTB Bobber Information02-07-2014, 10:00 PM
Must feel good to be down in FL barnone. It has been cold as heck around here as of late, I mean really for Houston, snow flurry's iceing, and just downright ugly. Haven't been able to ride at all these past couple weeks and it sucks. Hope the weather changes soon.. or I am gonna start the bike in the house and tool around the living room with it.
-
#4820 Re: Dong Fang DF 250 RTB Bobber Information02-09-2014, 03:52 AM
Even been a little cool here but still ok for riding.
I adjusted the valves and checked the timing on my 2012 DF today. The timing was right on but don't have a way to check the advance amount but it did move when I revved the engine. She still doesn't seem to have the speed of my old 2010. I even tried a 108 main jet but no change in performance.
Later I adjusted the air mixture screw and that seemed to help.Last edited by barnone; 02-10-2014 at 12:21 AM.
Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |