Thread: Lexmoto xtrs 2013
Results 1 to 3 of 3
|
-
#1 Lexmoto xtrs 2013
- Join Date
- Jan 2014
- Location
- Devon
- Posts
- 7
10-20-2014, 07:50 AMHi all I have a lexmoto xtrs just wondering about some things.
Where is the idle screw?
Is there just one bolt for sump at bottom of engine to drain oil out from ?
-
#2 Re: Lexmoto xtrs 2013
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
10-24-2014, 06:48 PMThe idle screw is generally on the right hand side of the carb.
I think there is just one largish bolt on the bottom of the engine to drain the oil.
I highly recommend that you buy the Haynes manual for Chinese 125s, it contains information on just about everything to do with servicing and repairing your bike.
http://www.ebay.co.uk/itm/HAYNES-SER...item2597037dc6Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#3 Re: Lexmoto xtrs 2013
- Join Date
- Jan 2014
- Location
- Devon
- Posts
- 7
10-24-2014, 09:56 PMHi thanks drained oil out and put oil through and let it come straight out sump it (to clean engine out) then put castrol 10 w 40 and now adjusted idle screw runs a dream !!
« Previous Thread | Next Thread » |
Similar Threads
-
LEXMOTO XTRS OIL FILTER
By dsmith88 in forum MaintenanceReplies: 2Last Post: 09-30-2014, 12:12 AM -
Lexmoto xtrs 125
By lomi in forum MaintenanceReplies: 5Last Post: 09-24-2014, 04:40 PM -
Lexmoto xtrs helpppp
By Abeales33 in forum Dirt n' Dual-SportReplies: 0Last Post: 11-14-2013, 11:11 PM -
lexmoto xtrs
By weedod in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 05-19-2013, 11:23 AM -
end can for lexmoto xtrs 125
By xtrs125 in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 02-19-2013, 10:46 AM